| FIRST LEG ANGLE | 6.3 RADIANS MINIMUM AND 6.5 RADIANS MAXIMUM |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 50.8 MILLIMETERS NOMINAL |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 27.0 MILLIMETERS NOMINAL |
| FIRST LEG END RADIUS | 53.0 MILLIMETERS MINIMUM AND 55.0 MILLIMETERS MAXIMUM |
| FIRST LEG HOLE ARRANGEMENT STYLE | FOUR HOLES |
| FIRST LEG DISTANCE BETWEEN FIRST AND SECOND HOLE CENTERS ALONG LENGTH | 63.5 MILLIMETERS NOMINAL |
| FIRST LEG DISTANCE BETWEEN FIRST AND SECOND HOLE CENTERS ALONG WIDTH | 44.45 MILLIMETERS NOMINAL |
| FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 88.6 MILLIMETERS MINIMUM AND 89.2 MILLIMETERS MAXIMUM |
| FIRST LEG DISTANCE BETWEEN SECOND AND THIRD HOLE CENTERS ALONG LENGTH | 12.7 MILLIMETERS NOMINAL |
| FIRST LEG DISTANCE BETWEEN SECOND AND THIRD HOLE CENTERS ALONG WIDTH | 17.45 MILLIMETERS NOMINAL |
| FIRST LEG STYLE | END RADIUS |
| FIRST LEG THICKNESS | 6.1 MILLIMETERS MINIMUM AND 6.7 MILLIMETERS MAXIMUM |
| FIRST LEG WIDTH | 107.7 MILLIMETERS MINIMUM AND 108.3 MILLIMETERS MAXIMUM |
| FIRST LEG LENGTH | 152.1 MILLIMETERS MINIMUM AND 152.7 MILLIMETERS MAXIMUM |
| MATERIAL DOCUMENT AND CLASSIFICATION | ASTM A-36 ASSN STD SINGLE MATERIAL RESPONSE |
| MATERIAL | STEEL |
| PART NAME ASSIGNED BY CONTROLLING AGENCY | CLAMP, MOUNT |
| MOUNTING HOLE TYPE | PLAIN |
| SECOND LEG CHAMFER ANGLE | 45.0 DEGREES NOMINAL |
| SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG LENGTH | 84.6 MILLIMETERS NOMINAL |
| SECOND LEG END WIDTH | 100.14 MILLIMETERS MINIMUM |
| SECOND LEG HOLE ARRANGEMENT STYLE | FOUR HOLES |
| SECOND LEG HOLE DIAMETER | 8.4 MILLIMETERS NOMINAL |
| SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 84.6 MILLIMETERS NOMINAL |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 12.1 MILLIMETERS NOMINAL |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 23.4 MILLIMETERS NOMINAL |
| SECOND LEG THICKNESS | 6.1 MILLIMETERS MINIMUM AND 6.7 MILLIMETERS MAXIMUM |
| SECOND LEG WIDTH | 107.7 MILLIMETERS MINIMUM AND 108.3 MILLIMETERS MAXIMUM |
| SECOND LEG LENGTH | 129.9 MILLIMETERS MINIMUM AND 130.5 MILLIMETERS MAXIMUM |
| SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| SECOND LEG STYLE | CHAMFERED ENDS |
| SPECIAL FEATURES | SECOND LEG HAS ONE 76.0MM (NOM) HOLE CENTERED WITHIN THE FOUR SMALLER HOLES |
| STYLE DESIGNATOR | ANGLE |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-DTL-53039 MIL SPEC SINGLE TREATMENT RESPONSE |
| SURFACE TREATMENT | PRIMER AND PAINT |