| CENTER SECTION WIDTH | 3.00 INCHES NOMINAL |
| CENTER SECTION HEIGHT | 2.75 INCHES NOMINAL |
| CENTER SECTION THICKNESS | 0.190 INCHES NOMINAL |
| FIRST LEG ANGLE | 0.125 RADIANS NOMINAL |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.71 INCHES NOMINAL |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.41 INCHES NOMINAL |
| FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG LENGTH | 1.575 INCHES NOMINAL |
| FIRST LEG HOLE DIAMETER | 0.397 INCHES NOMINAL |
| FIRST LEG LENGTH | 0.88 INCHES NOMINAL |
| FIRST LEG HOLE ARRANGEMENT STYLE | TWO HOLES |
| FIRST LEG THICKNESS | 1.50 INCHES NOMINAL |
| FIRST LEG WIDTH | 3.00 INCHES NOMINAL |
| FIRST LEG STYLE | SQUARE |
| MATERIAL DOCUMENT AND CLASSIFICATION | T6 PER AMS-QQ-A-250/11 NATIONAL STD/SPEC SINGLE MATERIAL RESPONSE |
| MATERIAL | ALUMINUM ALLOY 6061 |
| III PART NAME ASSIGNED BY CONTROLLING AGENCY | SCAVENGER FAN BRACKET ASSEMBLY |
| PROPRIETARY CHARACTERISTICS | PACS |
| MOUNTING HOLE TYPE | PLAIN AND THREADED |
| SECOND LEG ANGLE | 0.125 RADIANS NOMINAL |
| SECOND LEG RELATIONSHIP TO FIRST LEG | IDENTICAL |
| SECOND LEG THICKNESS | 1.50 INCHES NOMINAL |
| SECOND LEG LENGTH | 0.88 INCHES NOMINAL |
| SECOND LEG WIDTH | 3.00 INCHES NOMINAL |
| SPECIAL FEATURES | CENTER OF BRACKET HAS TWO MOUNTING HOLES THAT ARE 0.332" IN DIAMETER AND ARE THRU;MOUNTING HOLES ON LEGS HAVE 3/8-16 UNC-2B HELICOIL INSERT IN THEM THAT ARE 0.375" DEEP |
| STYLE DESIGNATOR | ADJACENT ANGLES |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | CLEAN ITEM IAW MIL-STD-171 AND CONVERSION COAT PER MIL-DDTL-81706,TYPE II AND MANUFACTURER'S INSTRUCTIONS MIL SPEC 1ST TREATMENT RESPONSE AND POWDER COAT SURFACES AFTER MASKING THREADS PER MIL-PRF-24712,TYPE IV,MANUFACTURER'S INSTRUCTIONS AND STANDARD PRACTICES MIL SPEC 2ND TREATMENT RESPONSE |
| SURFACE TREATMENT | CARC (CHEMICAL AGENT RESISTANT COATING) AND PAINT |