| MATERIAL DOCUMENT AND CLASSIFICATION | ASTM A36/A36M AMERICAN SOCIETY FOR TESTING AND MATERIALS (ASTM) 1ST MATERIAL RESPONSE OR ASTM A588/A558M AMERICAN SOCIETY FOR TESTING AND MATERIALS (ASTM) 2ND MATERIAL RESPONSE |
| MATERIAL | STEEL UNS K02600 |
| PROPRIETARY CHARACTERISTICS | PACS |
| SECOND LEG DISTANCE BETWEEN SECOND AND THIRD HOLE CENTERS ALONG WIDTH | 10.000 INCHES NOMINAL |
| SECOND LEG DISTANCE BETWEEN FIRST AND SECOND HOLE CENTERS ALONG WIDTH | 10.000 INCHES NOMINAL |
| SECOND LEG HOLE ARRANGEMENT STYLE | 3 SLOTS |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 7.000 INCHES NOMINAL |
| SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| SECOND LEG SLOT WIDTH | 0.750 INCHES NOMINAL |
| SECOND LEG STYLE | SQUARE |
| SECOND LEG THICKNESS | 0.375 INCHES NOMINAL |
| SECOND LEG LENGTH | 3.000 INCHES NOMINAL |
| SECOND LEG WIDTH | 29.000 INCHES NOMINAL |
| SPECIAL FEATURES | SLOTS ON SECOND LEG EXTEND TO EDGE |
| STYLE DESIGNATOR | ANGLE |
| FIRST LEG DISTANCE BETWEEN SECOND AND THIRD HOLE CENTERS ALONG WIDTH | 10.000 INCHES NOMINAL |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 1.560 INCHES NOMINAL |
| FIRST LEG ANGLE | 90.0 DEGREES NOMINAL |
| FIRST LEG DISTANCE BETWEEN FIRST AND SECOND HOLE CENTERS ALONG WIDTH | 10.000 INCHES NOMINAL |
| FIRST LEG HOLE DIAMETER | 0.500 INCHES NOMINAL |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 2.000 INCHES NOMINAL |
| FIRST LEG HOLE ARRANGEMENT STYLE | THREE HOLES |
| FIRST LEG THICKNESS | 0.375 INCHES NOMINAL |
| FIRST LEG WIDTH | 29.000 INCHES NOMINAL |
| FIRST LEG LENGTH | 2.750 INCHES NOMINAL |
| FIRST LEG STYLE | SQUARE |