| CENTER SECTION THICKNESS | 4.76 MILLIMETERS NOMINAL |
| CENTER SECTION WIDTH | 65.0 MILLIMETERS NOMINAL |
| CENTER SECTION HEIGHT | 91.8 MILLIMETERS NOMINAL |
| CENTER TO CENTER DISTANCE BETWEEN BRACKET MOUNTING HOLES | 29.95 MILLIMETERS MINIMUM AND 30.50 MILLIMETERS MAXIMUM |
| FABRICATION METHOD | FORMED |
| FEATURES PROVIDED | NUT |
| FIRST LEG ANGLE | 89.0 DEGREES MINIMUM AND 91.0 DEGREES MAXIMUM |
| FIRST LEG HOLE ARRANGEMENT STYLE | NO HOLE |
| FIRST LEG THICKNESS | 4.76 MILLIMETERS NOMINAL |
| FIRST LEG LENGTH | 48.0 MILLIMETERS NOMINAL |
| FIRST LEG WIDTH | 93.0 MILLIMETERS NOMINAL |
| MATERIAL DOCUMENT AND CLASSIFICATION | ASTM A514/A514M ASSN STD SINGLE MATERIAL RESPONSE |
| MATERIAL | STEEL |
| III PART NAME ASSIGNED BY CONTROLLING AGENCY | BRACKET MOUNT, DAMPER, REAR WELDMENT |
| PROPRIETARY CHARACTERISTICS | PACS |
| MOUNTING HOLE QUANTITY | 6 |
| MOUNTING HOLE DIAMETER | 7.6 MILLIMETERS MINIMUM AND 8.6 MILLIMETERS MAXIMUM |
| SECOND LEG ANGLE | 89.0 DEGREES MINIMUM AND 91.0 DEGREES MAXIMUM |
| SECOND LEG RELATIONSHIP TO FIRST LEG | IDENTICAL |
| SECOND LEG THICKNESS | 4.76 MILLIMETERS NOMINAL |
| SECOND LEG LENGTH | 48.0 MILLIMETERS NOMINAL |
| SPECIAL FEATURES | MATERIAL: STEEL PLATE TYPE HIGH STRENGTH, AS ROLLED, COLD FORMING, 3/16 INCH THK; ALTERNATE MATERIAL: STEEL PLATE, EN10149-2, GRADE S700MC, TYPE HIGH STRENGTH, AS ROLLED, COLD FORMING, 3 MM THK; NUTS ARE WELDED |
| STYLE DESIGNATOR | ADJACENT ANGLES |