| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.620 INCHES NOMINAL |
| FIRST LEG ANGLE | 90.0 DEGREES NOMINAL |
| FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG LENGTH | 0.540 INCHES NOMINAL |
| FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 2.222 INCHES NOMINAL |
| FIRST LEG LENGTH | 2.000 INCHES NOMINAL |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 1.180 INCHES NOMINAL |
| FIRST LEG HOLE ARRANGEMENT STYLE | 2 SLOTS |
| FIRST LEG WIDTH | 7.000 INCHES NOMINAL |
| FIRST LEG SLOT LENGTH | 0.750 INCHES NOMINAL |
| FIRST LEG SLOT WIDTH | 0.250 INCHES NOMINAL |
| FIRST LEG STYLE | SQUARE |
| FIRST LEG THICKNESS | 0.188 INCHES NOMINAL |
| MATERIAL DOCUMENT AND CLASSIFICATION | SAE QQ-A-200/8, 6061-T6 ASSN STD SINGLE MATERIAL RESPONSE |
| MATERIAL | ALUMINUM ALLOY 6061 |
| III HEAT TREATMENT | T-6 SOLUTION HEAT TREATED |
| III PART NAME ASSIGNED BY CONTROLLING AGENCY | BRACKET,TUBE |
| PROPRIETARY CHARACTERISTICS | PACS |
| SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 5.990 INCHES NOMINAL |
| SECOND LEG CUTOUT LENGTH | 1.720 INCHES NOMINAL |
| SECOND LEG CUTOUT WIDTH | 1.250 INCHES NOMINAL |
| SECOND LEG HOLE ARRANGEMENT STYLE | 2 SLOTS |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.750 INCHES NOMINAL |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.506 INCHES NOMINAL |
| SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| SECOND LEG SLOT LENGTH | 1.000 INCHES NOMINAL |
| SECOND LEG SLOT WIDTH | 0.313 INCHES NOMINAL |
| SECOND LEG STYLE | CUT OUT |
| SECOND LEG THICKNESS | 0.188 INCHES NOMINAL |
| SECOND LEG LENGTH | 2.000 INCHES NOMINAL |
| SECOND LEG WIDTH | 7.000 INCHES NOMINAL |
| SPECIAL FEATURES | SLOTS ON FIRST LEG ARE DIFFERENT DIMENSIONS; SECOND SLOT IS 0.188 +/-0.015 X 2.000; CUTOUT ON SECOND LEG IS ARCHED WITH RADIUS OF 0.625 IN AND IS CENTERED 2.180 IN. FROM RIGHT EDGE (WITH OPEN PART OF ANGLE FACING DOWN) |
| STYLE DESIGNATOR | ANGLE |
| SURFACE TREATMENT | CHEMICAL AND PRIMER AND PAINT |