| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.28 INCHES MINIMUM AND 0.34 INCHES MAXIMUM |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.35 INCHES MINIMUM AND 0.41 INCHES MAXIMUM |
| FIRST LEG CHAMFER ANGLE | 40.0 DEGREES MINIMUM AND 50.0 DEGREES MAXIMUM |
| FIRST LEG LENGTH | 0.780 INCHES MINIMUM AND 0.840 INCHES MAXIMUM |
| FIRST LEG HOLE ARRANGEMENT STYLE | ONE HOLE |
| FIRST LEG HOLE DIAMETER | 0.219 INCHES MINIMUM AND 0.224 INCHES MAXIMUM |
| FIRST LEG WIDTH | 0.72 INCHES MINIMUM AND 0.78 INCHES MAXIMUM |
| FIRST LEG STYLE | CHAMFERED ENDS |
| FIRST LEG THICKNESS | 0.040 INCHES NOMINAL |
| MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5518 ASSN STD SINGLE MATERIAL RESPONSE |
| MATERIAL | STEEL CORROSION RESISTING |
| III PART NAME ASSIGNED BY CONTROLLING AGENCY | BRACKET-ANGLE |
| PROPRIETARY CHARACTERISTICS | PACS |
| MOUNTING HOLE QUANTITY | 3 |
| MOUNTING HOLE TYPE | PLAIN |
| SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 0.365 INCHES MINIMUM AND 0.385 INCHES MAXIMUM |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.28 INCHES MINIMUM AND 0.34 INCHES MAXIMUM |
| SECOND LEG CHAMFER ANGLE | 40.0 DEGREES MINIMUM AND 50.0 DEGREES MAXIMUM |
| SECOND LEG HOLE ARRANGEMENT STYLE | TWO HOLES |
| SECOND LEG HOLE DIAMETER | 0.135 INCHES MINIMUM AND 0.141 INCHES MAXIMUM |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.15 INCHES MINIMUM AND 0.21 INCHES MAXIMUM |
| SECOND LEG END WIDTH | 0.365 INCHES MINIMUM AND 0.385 INCHES MAXIMUM |
| SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| SECOND LEG STYLE | CHAMFERED ENDS |
| SECOND LEG THICKNESS | 0.040 INCHES NOMINAL |
| SECOND LEG WIDTH | 0.72 INCHES MINIMUM AND 0.78 INCHES MAXIMUM |
| SECOND LEG LENGTH | 1.780 INCHES MINIMUM AND 1.840 INCHES MAXIMUM |
| STYLE DESIGNATOR | ANGLE |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | AMS QQ-P-35 ASSN STD SINGLE TREATMENT RESPONSE |
| SURFACE TREATMENT | PASSIVATE |