| MATERIAL DOCUMENT AND CLASSIFICATION | AMS-QQ-A-250/8 INTERNATIONAL STD/SPEC SINGLE MATERIAL RESPONSE |
| MATERIAL | ALUMINUM ALLOY 5052 |
| PART NAME ASSIGNED BY CONTROLLING AGENCY | POWER FILTER COVER PLATE |
| PROPRIETARY CHARACTERISTICS | PACS |
| MOUNTING HOLE DIAMETER | 0.201 INCHES NOMINAL ALL HOLES |
| MOUNTING HOLE TYPE | THRU HOLE ALL HOLES |
| MOUNTING HOLE/SLOT QUANTITY | 7 |
| SPECIAL FEATURES | APPLY CONVERSION COATING PER MIL-DTL-81706, TYPE II;APPLY POWDER COATINGTO ALL SURFACES PER MIL-PRF-24712, TYPE IV;MACHINED SURFACES SHALL BE 0.125 MICRO INCHES MINIMUM;REMOVE ALL BURRS AND SHARP EDGES EQUIVALENT TO A RADII OF 0.01. |
| SECURING DEVICE TYPE | THREADED FASTENER |
| WIDTH | 8.500 INCHES NOMINAL |
| DISTANCE BETWEEN HOLES ALONG LENGTH | 6.000 INCHES NOMINAL |
| DISTANCE BETWEEN HOLES ALONG WIDTH | 5.000 INCHES NOMINAL |
| BODY THICKNESS | 0.090 INCHES NOMINAL |
| BOLT HOLE CENTERLINE TO NEAREST EDGE DISTANCE | 0.371 INCHES NOMINAL |
| CORNER CUT TYPE | ROUND |
| CORNER RADIUS | 0.218 INCHES NOMINAL |
| HOLE QUANTITY ALONG LENGTH | 3 |
| HOLE QUANTITY ALONG WIDTH | 4 |
| INSIDE WIDTH | 1.500 INCHES NOMINAL |
| LENGTH | 18.250 INCHES NOMINAL |