| FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 66.0 MILLIMETERS NOMINAL |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 41.35 MILLIMETERS NOMINAL |
| FIRST LEG ANGLE | 90.0 DEGREES NOMINAL |
| FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG LENGTH | 66.0 MILLIMETERS NOMINAL |
| FIRST LEG LENGTH | 164.3 MILLIMETERS NOMINAL |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 43.2 MILLIMETERS NOMINAL |
| FIRST LEG HOLE ARRANGEMENT STYLE | 4 SLOTS |
| FIRST LEG THICKNESS | 25.4 MILLIMETERS NOMINAL |
| FIRST LEG WIDTH | 152.4 MILLIMETERS NOMINAL |
| FIRST LEG SLOT LENGTH | 22.5 MILLIMETERS NOMINAL |
| FIRST LEG SLOT WIDTH | 12.72 MILLIMETERS MINIMUM AND 12.90 MILLIMETERS MAXIMUM |
| FIRST LEG STYLE | SQUARE |
| MATERIAL | ALUMINUM ALLOY 7050 |
| III PART NAME ASSIGNED BY CONTROLLING AGENCY | MOUNT,BALL SCREW |
| PROPRIETARY CHARACTERISTICS | PACS |
| SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG LENGTH | 94.0 MILLIMETERS NOMINAL |
| SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 83.0 MILLIMETERS NOMINAL |
| SECOND LEG HOLE ARRANGEMENT STYLE | FOUR HOLES |
| SECOND LEG HOLE DIAMETER | 8.77 MILLIMETERS MINIMUM AND 8.95 MILLIMETERS MAXIMUM |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 52.8 MILLIMETERS NOMINAL |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 34.7 MILLIMETERS NOMINAL |
| SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| SECOND LEG STYLE | SQUARE |
| SECOND LEG THICKNESS | 25.4 MILLIMETERS NOMINAL |
| SECOND LEG LENGTH | 127.4 MILLIMETERS NOMINAL |
| STYLE DESIGNATOR | ANGLE |
| SURFACE TREATMENT | CHROMATE AND PRIMER EPOXY AND PLASTIC POLYURETHANE |