| DISTANCE FROM END TO HOLE CENTER | 0.250 INCHES NOMINAL ALL ENDS |
| DRILLED HOLE LOCATION | BOTH ENDS |
| CHAMFER ANGLE | 45.0 DEGREES NOMINAL ALL ENDS |
| CHAMFER LENGTH | 0.0625 INCHES NOMINAL ALL ENDS |
| HOLE DIAMETER | 0.1406 INCHES ALL ENDS |
| MATERIAL DOCUMENT AND CLASSIFICATION | ASTM-B 21 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| MATERIAL | COPPER ALLOY OVERALL |
| III PART NAME ASSIGNED BY CONTROLLING AGENCY | HINGE PIN |
| PROPRIETARY CHARACTERISTICS | PACS |
| OVERALL DIAMETER | 0.625 INCHES NOMINAL |
| OVERALL LENGTH | 25.250 INCHES NOMINAL |