| CENTER SECTION THICKNESS | 3.2 MILLIMETERS NOMINAL |
| CENTER SECTION WIDTH | 50.0 MILLIMETERS NOMINAL |
| CENTER SECTION HEIGHT | 56.4 MILLIMETERS NOMINAL |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 17.6 MILLIMETERS NOMINAL |
| FIRST LEG CORNER RADIUS | 6.4 MILLIMETERS NOMINAL |
| FIRST LEG HOLE DIAMETER | 11.0 MILLIMETERS NOMINAL |
| FIRST LEG LENGTH | 13.9 MILLIMETERS NOMINAL |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 25.0 MILLIMETERS NOMINAL |
| FIRST LEG HOLE ARRANGEMENT STYLE | ONE HOLE |
| FIRST LEG THICKNESS | 3.2 MILLIMETERS NOMINAL |
| FIRST LEG WIDTH | 50.0 MILLIMETERS NOMINAL |
| FIRST LEG OFFSET ANGLE | 6.3 RADIANS NOMINAL |
| FIRST LEG STYLE | CORNER RADIUS |
| HOLE QUANTITY | 2 |
| MATERIAL | STEEL |
| PROPRIETARY CHARACTERISTICS | PACS |
| MOUNTING HOLE DIAMETER | 9.5 MILLIMETERS MINIMUM AND 11.0 MILLIMETERS MAXIMUM |
| SECOND LEG ANGLE | 78.0 DEGREES NOMINAL |
| SECOND LEG CHAMFER ANGLE | 15.0 DEGREES NOMINAL |
| SECOND LEG END WIDTH | 1.5 MILLIMETERS NOMINAL |
| SECOND LEG HOLE ARRANGEMENT STYLE | ONE HOLE |
| SECOND LEG HOLE DIAMETER | 9.5 MILLIMETERS NOMINAL |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 28.3 MILLIMETERS NOMINAL |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 25.0 MILLIMETERS NOMINAL |
| SECOND LEG LENGTH | 65.0 MILLIMETERS NOMINAL |
| SECOND LEG OFFSET ANGLE | 6.3 RADIANS NOMINAL |
| SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| SECOND LEG STYLE | CHAMFERED ENDS |
| SECOND LEG THICKNESS | 3.2 MILLIMETERS NOMINAL |
| SECOND LEG WIDTH | 50.0 MILLIMETERS NOMINAL |
| STYLE DESIGNATOR | OFFSET DOUBLE ANGLE |
| SURFACE TREATMENT | PAINT |