| CENTER SECTION THICKNESS | 0.250 INCHES NOMINAL |
| FIRST LEG HOLE ARRANGEMENT STYLE | NO HOLE |
| FIRST LEG THICKNESS | 0.250 INCHES NOMINAL |
| HEAT TREATMENT | H-32 STRAIN HARDENED |
| HOLE QUANTITY | 2 |
| MATERIAL DOCUMENT AND CLASSIFICATION | ASTM B209 ASSN STD SINGLE MATERIAL RESPONSE OR AMS 4016 ASSN STD SINGLE MATERIAL RESPONSE |
| MATERIAL | ALUMINUM ALLOY 5052 |
| PART NAME ASSIGNED BY CONTROLLING AGENCY | SUPPORT, RIGHT HAND |
| MOUNTING HOLE TYPE | PLAIN |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.470 INCHES MINIMUM AND 0.530 INCHES MAXIMUM |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.970 INCHES MINIMUM AND 1.030 INCHES MAXIMUM |
| SECOND LEG HOLE ARRANGEMENT STYLE | TWO HOLES |
| SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 3.970 INCHES MINIMUM AND 4.030 INCHES MAXIMUM |
| SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| SECOND LEG STYLE | SQUARE |
| SECOND LEG THICKNESS | 0.250 INCHES NOMINAL |
| SECOND LEG HOLE DIAMETER | 0.470 INCHES MINIMUM AND 0.530 INCHES MAXIMUM |
| SECOND LEG LENGTH | 1.720 INCHES MINIMUM AND 1.780 INCHES MAXIMUM |
| SECOND LEG WIDTH | 5.970 INCHES MINIMUM AND 6.030 INCHES MAXIMUM |
| SPECIAL FEATURES | PROTECTIVE FINISH PER 19207-12577737 PARAGRAPH 2.4. COLOR IS TAN 686A, CHIP NUMBER 33446 PER FED-STD-595. |