| MATERIAL | ALUMINUM ALLOY 5052 |
| III HEAT TREATMENT | H-32 STRAIN HARDENED |
| III PART NAME ASSIGNED BY CONTROLLING AGENCY | BRKT, VOLT GAUGE MTG |
| PROPRIETARY CHARACTERISTICS | PACS |
| MOUNTING HOLE TYPE | PLAIN |
| SECOND LEG CORNER RADIUS | 0.15 INCHES NOMINAL |
| SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| SECOND LEG STYLE | CORNER RADIUS |
| SECOND LEG THICKNESS | 0.09 INCHES NOMINAL |
| SECOND LEG LENGTH | 4.25 INCHES NOMINAL |
| SECOND LEG WIDTH | 3.63 INCHES NOMINAL |
| SPECIAL FEATURES | FINISH PER FM100: C40 TYPE II, P20 TYPE VI, P30 TYPE VI. OPTIONAL FINISH PER FM100: C50 TYPE I, P20 TYPE I, P30 TYPE VI. SECOND LEG HAS (8) TOTAL HOLES, (4) WITH .128 INCH DIAMETER, (1) WITH .219 INCH DIAMETER, (1) WITH .490 INCH DIAMETER, (1) WITH .130 INCH DIAMETER, AND (1) WITH .2098 INCH DIAMETER. |
| STYLE DESIGNATOR | ANGLE |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.50 INCHES NOMINAL |
| FIRST LEG ANGLE | 90.0 DEGREES NOMINAL |
| FIRST LEG CORNER RADIUS | 0.15 INCHES NOMINAL |
| FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 1.969 INCHES NOMINAL |
| FIRST LEG LENGTH | 1.25 INCHES NOMINAL |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.83 INCHES NOMINAL |
| FIRST LEG HOLE ARRANGEMENT STYLE | TWO HOLES |
| FIRST LEG HOLE DIAMETER | 0.234 INCHES NOMINAL |
| FIRST LEG WIDTH | 3.63 INCHES NOMINAL |
| FIRST LEG STYLE | CORNER RADIUS |
| FIRST LEG THICKNESS | 0.09 INCHES NOMINAL |
| HOLE QUANTITY | 10 |
| MATERIAL DOCUMENT AND CLASSIFICATION | ASTM B209 ASSN STD SINGLE MATERIAL RESPONSE |