| FIRST LEG STYLE | SQUARE |
| FIRST LEG THICKNESS | 0.250 INCHES NOMINAL |
| FIRST LEG HOLE DIAMETER | 0.191 INCHES MINIMUM AND 0.197 INCHES MAXIMUM |
| FIRST LEG LENGTH | 1.00 INCHES NOMINAL |
| FIRST LEG WIDTH | 17.71 INCHES MINIMUM AND 17.73 INCHES MAXIMUM |
| HEAT TREATMENT | T-6 SOLUTION HEAT TREATED |
| HOLE QUANTITY | 8 |
| MATERIAL DOCUMENT AND CLASSIFICATION | ASTM B308 ASSN STD SINGLE MATERIAL RESPONSE |
| MATERIAL | ALUMINUM ALLOY 6061 |
| PART NAME ASSIGNED BY CONTROLLING AGENCY | TRAY, DSU DRAWER |
| MOUNTING HOLE TYPE | PLAIN |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.42 INCHES NOMINAL |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.59 INCHES MINIMUM AND 0.61 INCHES MAXIMUM |
| SECOND LEG HOLE ARRANGEMENT STYLE | TWO HOLES |
| SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 16.515 INCHES MINIMUM AND 16.525 INCHES MAXIMUM |
| SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| SECOND LEG STYLE | SQUARE |
| SECOND LEG THICKNESS | 0.250 INCHES NOMINAL |
| SECOND LEG HOLE DIAMETER | 0.396 INCHES MINIMUM AND 0.403 INCHES MAXIMUM |
| SECOND LEG LENGTH | 1.00 INCHES NOMINAL |
| SECOND LEG WIDTH | 17.71 INCHES MINIMUM AND 17.73 INCHES MAXIMUM |
| SPECIAL FEATURES | FIRST LEG HAS (6) .192 INCH DIAMETER THRU HOLES. |
| STYLE DESIGNATOR | ANGLE |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-DTL-5541, TYPE 1, CLASS 3 MIL SPEC SINGLE TREATMENT RESPONSE |
| SURFACE TREATMENT | CHROMATE |