| DISTANCE FROM CENTER OF MOUNTING HOLE TO EDGE ALONG THE WIDTH | 0.53 INCHES MINIMUM AND 0.65 INCHES MAXIMUM |
| DISTANCE FROM END TO FIRST CLAMPING HOLE CENTER | 1.19 INCHES MINIMUM AND 1.31 INCHES MAXIMUM |
| DISTANCE FROM END TO FIRST MOUNTING HOLE CENTER | 0.32 INCHES MINIMUM AND 0.44 INCHES MAXIMUM |
| BLOCK HEIGHT | 0.69 INCHES MINIMUM AND 0.81 INCHES MAXIMUM |
| CENTER TO CENTER DISTANCE BETWEEN FIRST AND SECOND CLAMPING HOLES | 1.105 INCHES MINIMUM AND 1.145 INCHES MAXIMUM |
| CENTER TO CENTER DISTANCE BETWEEN FIRST AND THIRD CLAMPING HOLES | 2.230 INCHES MINIMUM AND 2.270 INCHES MAXIMUM |
| CLAMPING HOLE DIAMETER | 0.480 INCHES MINIMUM AND 0.520 INCHES MAXIMUM SECOND HOLE |
| CLAMPING HOLE DIAMETER | 0.980 INCHES MINIMUM AND 1.020 INCHES MAXIMUM FIRST HOLE |
| CLAMPING HOLE DIAMETER | 0.980 INCHES MINIMUM AND 1.020 INCHES MAXIMUM THIRD HOLE |
| CLAMPING HOLE QUANTITY | 3 |
| MATERIAL | PLASTIC |
| PART NAME ASSIGNED BY CONTROLLING AGENCY | CLAMP, TWIN |
| PROPRIETARY CHARACTERISTICS | PACS |
| MOUNTING FACILITY | UNTHREADED HOLE |
| MOUNTING HOLE DIAMETER | 0.308 INCHES MINIMUM AND 0.348 INCHES MAXIMUM |
| MOUNTING HOLE QUANTITY | 2 |
| OVERALL HEIGHT | 1.63 INCHES NOMINAL |
| OVERALL LENGTH | 4.69 INCHES MINIMUM AND 4.81 INCHES MAXIMUM |
| OVERALL WIDTH | 1.12 INCHES MINIMUM AND 1.24 INCHES MAXIMUM |
| SPECIAL FEATURES | MATERIAL IS POLYETHYLENE UHMW. |
| STYLE DESIGNATOR | RECTANGULAR |