| FIRST LEG ANGLE | 0.190 RADIANS NOMINAL |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.750 INCHES NOMINAL |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.500 INCHES NOMINAL |
| FIRST LEG HOLE ARRANGEMENT STYLE | TWO HOLES |
| FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 1.630 INCHES NOMINAL |
| FIRST LEG STYLE | SQUARE |
| FIRST LEG THICKNESS | 0.1875 INCHES NOMINAL |
| FIRST LEG HOLE DIAMETER | 0.406 INCHES NOMINAL |
| FIRST LEG LENGTH | 1.940 INCHES NOMINAL |
| FIRST LEG WIDTH | 2.630 INCHES NOMINAL |
| MATERIAL DOCUMENT AND CLASSIFICATION | ASTM A36 ASSN STD SINGLE MATERIAL RESPONSE |
| MATERIAL | STEEL |
| MOUNTING HOLE TYPE | PLAIN |
| PART NAME ASSIGNED BY CONTROLLING AGENCY | BRACKET, GLADHAND, LH |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.500 INCHES NOMINAL |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.840 INCHES NOMINAL |
| SECOND LEG END WIDTH | 1.870 INCHES NOMINAL |
| SECOND LEG HOLE ARRANGEMENT STYLE | TWO HOLES |
| SECOND LEG CHAMFER ANGLE | 45.0 DEGREES NOMINAL |
| SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG LENGTH | 1.060 INCHES NOMINAL |
| SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 1.290 INCHES NOMINAL |
| SECOND LEG LENGTH | 7.190 INCHES NOMINAL |
| SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| SECOND LEG STYLE | CHAMFERED ENDS |
| SECOND LEG THICKNESS | 0.1875 INCHES NOMINAL |
| SECOND LEG HOLE DIAMETER | 1.060 INCHES NOMINAL |
| SECOND LEG WIDTH | 3.000 INCHES NOMINAL |
| SPECIAL FEATURES | SMALLER HOLE ON SECOND LEG IS 0.312 INCHES (NOM) |
| STYLE DESIGNATOR | ANGLE |
| SURFACE TREATMENT | PAINT |