| FIRST LEG WIDTH | 24.75 INCHES NOMINAL |
| FIRST LEG LENGTH | 3.0 INCHES NOMINAL |
| FIRST LEG STYLE | CUT OUT |
| FIRST LEG THICKNESS | 0.1196 INCHES NOMINAL |
| HOLE QUANTITY | 6 |
| MATERIAL DOCUMENT AND CLASSIFICATION | ASTM A1011 ASSN STD SINGLE MATERIAL RESPONSE |
| MATERIAL | STEEL |
| PROPRIETARY CHARACTERISTICS | PACS |
| MOUNTING HOLE TYPE | PLAIN |
| SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 3.0 INCHES NOMINAL |
| SECOND LEG ANGLE | 0.12 RADIANS NOMINAL |
| SECOND LEG CORNER RADIUS | 1.0 INCHES NOMINAL |
| SECOND LEG HOLE ARRANGEMENT STYLE | TWO HOLES |
| SECOND LEG HOLE DIAMETER | 0.38 INCHES NOMINAL |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 1.7 INCHES NOMINAL |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 1.38 INCHES NOMINAL |
| SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| SECOND LEG STYLE | CORNER RADIUS |
| SECOND LEG THICKNESS | 0.1196 INCHES NOMINAL |
| SECOND LEG LENGTH | 3.5 INCHES NOMINAL |
| SECOND LEG WIDTH | 5.75 INCHES NOMINAL |
| SPECIAL FEATURES | CENTER SECTION HAS (2) .38 INCH THRU HOLES. |
| STYLE DESIGNATOR | DOUBLE ANGLE |
| CENTER SECTION WIDTH | 5.75 INCHES NOMINAL |
| CENTER SECTION HEIGHT | 2.07 INCHES NOMINAL |
| CENTER SECTION THICKNESS | 0.1196 INCHES NOMINAL |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.63 INCHES NOMINAL |
| FIRST LEG ANGLE | 45.0 DEGREES NOMINAL |
| FIRST LEG CUTOUT LENGTH | 1.25 INCHES NOMINAL |
| FIRST LEG CUTOUT WIDTH | 22.25 INCHES NOMINAL |
| FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 23.500 INCHES NOMINAL |
| FIRST LEG HOLE DIAMETER | 0.63 INCHES NOMINAL |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.63 INCHES NOMINAL |
| FIRST LEG HOLE ARRANGEMENT STYLE | TWO HOLES |