|
|
|
National Stock Number:
5340-01-629-2948
Federal Supply Class:
5340
National Item Identification Number:
016292948
Description:
BRACKET,DOUBLE ANGLE
Detail:
A rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
|
Manufacturer Information:
| K20009 | 1CWA3 | PALOMAR DISPLAY PRODUCTS, INC. |
|
Techincal Specification:
| SECOND LEG RELATIONSHIP TO FIRST LEG | IDENTICAL | | SECOND LEG THICKNESS | 0.062 INCHES NOMINAL | | STYLE DESIGNATOR | DOUBLE ANGLE | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-DTL-5541, CL 3, CLEAR MIL SPEC SINGLE TREATMENT RESPONSE | | SURFACE TREATMENT | CHROMATE | | CENTER SECTION WIDTH | 0.375 INCHES NOMINAL | | CENTER SECTION HEIGHT | 0.677 INCHES NOMINAL | | CENTER SECTION THICKNESS | 0.062 INCHES NOMINAL | | FIRST LEG ANGLE | 90.0 DEGREES NOMINAL | | FIRST LEG CHAMFER ANGLE | 45.0 DEGREES NOMINAL | | FIRST LEG LENGTH | 0.438 INCHES NOMINAL | | FIRST LEG END WIDTH | 0.313 INCHES NOMINAL | | FIRST LEG HOLE ARRANGEMENT STYLE | NO HOLE | | FIRST LEG WIDTH | 0.313 INCHES NOMINAL | | FIRST LEG STYLE | CHAMFERED ENDS | | FIRST LEG THICKNESS | 0.062 INCHES NOMINAL | | HOLE QUANTITY | 1 | | MATERIAL | ALUMINUM ALLOY 5052 | | III PART NAME ASSIGNED BY CONTROLLING AGENCY | BRACKET, HOLDING SDI SMB | | PROPRIETARY CHARACTERISTICS | PACS | | SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.175 INCHES NOMINAL | | SECOND LEG ANGLE | 90.0 DEGREES NOMINAL | | SECOND LEG CHAMFER ANGLE | 45.0 DEGREES NOMINAL | | SECOND LEG HOLE ARRANGEMENT STYLE | ONE HOLE | | SECOND LEG HOLE DIAMETER | 0.166 INCHES MINIMUM AND 0.169 INCHES MAXIMUM | | SECOND LEG LENGTH | 0.500 INCHES NOMINAL | | SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.188 INCHES NOMINAL | | SECOND LEG END WIDTH | 0.500 INCHES NOMINAL |
|
|