|
|
|
National Stock Number:
5340-01-629-2922
Federal Supply Class:
5340
National Item Identification Number:
016292922
Description:
BRACKET,DOUBLE ANGLE
Detail:
A rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
|
Manufacturer Information:
| K19510 | 1CWA3 | PALOMAR DISPLAY PRODUCTS, INC. |
|
Techincal Specification:
| CENTER SECTION WIDTH | 0.500 INCHES NOMINAL | | CENTER SECTION HEIGHT | 0.375 INCHES NOMINAL | | CENTER SECTION THICKNESS | 0.062 INCHES NOMINAL | | FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.330 INCHES NOMINAL | | FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.330 INCHES NOMINAL | | FIRST LEG ANGLE | 90.0 DEGREES NOMINAL | | FIRST LEG CHAMFER ANGLE | 45.0 DEGREES NOMINAL | | FIRST LEG LENGTH | 0.938 INCHES NOMINAL | | FIRST LEG END WIDTH | 0.488 INCHES NOMINAL | | FIRST LEG HOLE ARRANGEMENT STYLE | ONE HOLE | | FIRST LEG HOLE DIAMETER | 0.166 INCHES MINIMUM AND 0.169 INCHES MAXIMUM | | FIRST LEG WIDTH | 0.500 INCHES NOMINAL | | FIRST LEG STYLE | CHAMFERED ENDS | | FIRST LEG THICKNESS | 0.062 INCHES NOMINAL | | HOLE QUANTITY | 3 | | MATERIAL | ALUMINUM ALLOY 5052 | | III PART NAME ASSIGNED BY CONTROLLING AGENCY | BRACKET, SUPPORT, RIGHT | | PROPRIETARY CHARACTERISTICS | PACS | | MOUNTING HOLE DIAMETER | 0.166 INCHES MINIMUM AND 0.169 INCHES MAXIMUM | | SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.188 INCHES NOMINAL | | SECOND LEG ANGLE | 90.0 DEGREES NOMINAL | | SECOND LEG CHAMFER ANGLE | 45.0 DEGREES NOMINAL | | SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG LENGTH | 0.751 INCHES NOMINAL | | SECOND LEG HOLE ARRANGEMENT STYLE | TWO HOLES | | SECOND LEG HOLE DIAMETER | 0.166 INCHES MINIMUM AND 0.169 INCHES MAXIMUM | | SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.250 INCHES NOMINAL | | SECOND LEG END WIDTH | 0.488 INCHES NOMINAL | | SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL | | SECOND LEG STYLE | CHAMFERED ENDS | | SECOND LEG THICKNESS | 0.062 INCHES NOMINAL | | SECOND LEG WIDTH | 0.500 INCHES NOMINAL | | SECOND LEG LENGTH | 1.062 INCHES NOMINAL | | SPECIAL FEATURES | FIRST LEG HAS HOLLOW PEM STANDOFF IN THE HOLE (P/N BSOS-440-16); SECOND LEG HAS PEM NUTS, (P/N CLS-440-2) ON HOLES; MATERIAL IS AL ALLOY, SHT .062, 5052-H32 OR H34 | | STYLE DESIGNATOR | DOUBLE ANGLE |
|
|