| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.50 INCHES MINIMUM AND 0.62 INCHES MAXIMUM |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 1.13 INCHES MINIMUM AND 1.25 INCHES MAXIMUM |
| FIRST LEG HOLE ARRANGEMENT STYLE | ONE HOLE |
| FIRST LEG ANGLE | 90.0 DEGREES NOMINAL |
| FIRST LEG STYLE | SQUARE |
| FIRST LEG THICKNESS | 0.25 INCHES NOMINAL |
| FIRST LEG HOLE DIAMETER | 0.27 INCHES MINIMUM AND 0.39 INCHES MAXIMUM |
| FIRST LEG LENGTH | 1.50 INCHES NOMINAL |
| FIRST LEG WIDTH | 2.32 INCHES MINIMUM AND 2.44 INCHES MAXIMUM |
| HEAT TREATMENT | T-6 SOLUTION HEAT TREATED |
| HOLE QUANTITY | 3 |
| MATERIAL DOCUMENT AND CLASSIFICATION | ASTM B221 ASSN STD SINGLE MATERIAL RESPONSE |
| MATERIAL | ALUMINUM ALLOY 6061 |
| PART NAME ASSIGNED BY CONTROLLING AGENCY | SUPPORT ARM PIVOT ANGLE |
| MOUNTING HOLE TYPE | PLAIN |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.69 INCHES MINIMUM AND 0.81 INCHES MAXIMUM |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.19 INCHES MINIMUM AND 0.31 INCHES MAXIMUM |
| SECOND LEG HOLE ARRANGEMENT STYLE | TWO HOLES |
| SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 1.88 INCHES NOMINAL |
| SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| SECOND LEG STYLE | SQUARE |
| SECOND LEG THICKNESS | 0.25 INCHES NOMINAL |
| SECOND LEG HOLE DIAMETER | 0.19 INCHES MINIMUM AND 0.31 INCHES MAXIMUM |
| SECOND LEG LENGTH | 1.50 INCHES NOMINAL |
| SECOND LEG WIDTH | 2.32 INCHES MINIMUM AND 2.44 INCHES MAXIMUM |
| STYLE DESIGNATOR | ANGLE |