|
|
|
National Stock Number:
5340-01-628-5266
Federal Supply Class:
5340
National Item Identification Number:
016285266
Description:
BRACKET,DOUBLE ANGLE
Detail:
A rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
|
Manufacturer Information:
| 06A8124027 | 5B5M3 | EDGEWOOD CHEMICAL BIOLOGICAL CENTER DIV DEPT OF ARMY |
|
Techincal Specification:
| CENTER SECTION WIDTH | 1.00 INCHES NOMINAL | | CENTER SECTION HEIGHT | 1.00 INCHES NOMINAL | | CENTER SECTION THICKNESS | 0.06 INCHES NOMINAL | | FIRST LEG DISTANCE BETWEEN SECOND AND THIRD HOLE CENTERS ALONG LENGTH | 2.12 INCHES NOMINAL | | FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 1.31 INCHES NOMINAL | | FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.38 INCHES NOMINAL | | FIRST LEG ANGLE | 90.0 DEGREES NOMINAL | | FIRST LEG DISTANCE BETWEEN FIRST AND SECOND HOLE CENTERS ALONG LENGTH | 2.13 INCHES NOMINAL | | FIRST LEG HOLE ARRANGEMENT STYLE | THREE HOLES | | FIRST LEG HOLE DIAMETER | 0.20 INCHES NOMINAL | | FIRST LEG WIDTH | 0.81 INCHES NOMINAL | | FIRST LEG LENGTH | 7.00 INCHES NOMINAL | | FIRST LEG STYLE | ANGLE | | FIRST LEG THICKNESS | 0.06 INCHES NOMINAL | | HOLE QUANTITY | 3 | | MATERIAL DOCUMENT AND CLASSIFICATION | ASTM B221 NATIONAL STD/SPEC SINGLE MATERIAL RESPONSE | | MATERIAL | ALUMINUM ALLOY 6061 | | III PART NAME ASSIGNED BY CONTROLLING AGENCY | TOP ANGLE PLATE OUTLET | | PROPRIETARY CHARACTERISTICS | NPAC | | MOUNTING HOLE TYPE | PLAIN | | SECOND LEG ANGLE | 90.0 DEGREES NOMINAL | | SECOND LEG HOLE ARRANGEMENT STYLE | NO HOLE | | SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL | | SECOND LEG STYLE | ANGLE | | SECOND LEG THICKNESS | 0.06 INCHES NOMINAL | | SECOND LEG WIDTH | 0.75 INCHES NOMINAL | | SECOND LEG LENGTH | 4.25 INCHES NOMINAL | | STYLE DESIGNATOR | DOUBLE ANGLE |
|
|