|
|
|
National Stock Number:
5340-01-628-2564
Federal Supply Class:
5340
National Item Identification Number:
016282564
Description:
BRACKET,DOUBLE ANGLE
Detail:
A rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
|
Manufacturer Information:
| 06A8124004 | 5B5M3 | EDGEWOOD CHEMICAL BIOLOGICAL CENTER DIV DEPT OF ARMY | | 06A81244004 | 5B5M3 | EDGEWOOD CHEMICAL BIOLOGICAL CENTER DIV DEPT OF ARMY |
|
Techincal Specification:
| CENTER SECTION HEIGHT | 4.700 INCHES NOMINAL | | CENTER SECTION THICKNESS | 0.250 INCHES NOMINAL | | CENTER SECTION WIDTH | 1.250 INCHES NOMINAL | | FIRST LEG ANGLE | 0.280 RADIANS MAXIMUM | | FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.630 INCHES NOMINAL | | FIRST LEG END RADIUS | 0.630 INCHES NOMINAL | | FIRST LEG HOLE ARRANGEMENT STYLE | ONE HOLE | | FIRST LEG STYLE | END RADIUS | | FIRST LEG THICKNESS | 0.250 INCHES NOMINAL | | FIRST LEG WIDTH | 0.250 INCHES NOMINAL | | FIRST LEG HOLE DIAMETER | 0.500 INCHES NOMINAL | | FIRST LEG LENGTH | 1.870 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | ASTM B221 ASSN STD SINGLE MATERIAL RESPONSE | | MATERIAL | ALUMINUM ALLOY 6061 | | PART NAME ASSIGNED BY CONTROLLING AGENCY | HINGE FOR REAR PANEL DOOR | | SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.630 INCHES NOMINAL | | SECOND LEG END RADIUS | 0.630 INCHES NOMINAL | | SECOND LEG HOLE ARRANGEMENT STYLE | ONE HOLE | | SECOND LEG ANGLE | 0.280 RADIANS MAXIMUM | | SECOND LEG RELATIONSHIP TO FIRST LEG | IDENTICAL | | SECOND LEG STYLE | END RADIUS | | SECOND LEG THICKNESS | 0.250 INCHES NOMINAL | | SECOND LEG WIDTH | 0.250 INCHES NOMINAL | | SECOND LEG HOLE DIAMETER | 0.500 INCHES NOMINAL | | SECOND LEG LENGTH | 1.870 INCHES NOMINAL | | STYLE DESIGNATOR | ADJACENT ANGLES |
|
|