| FIRST LEG THICKNESS | 0.375 INCHES NOMINAL |
| FIRST LEG STYLE | CHAMFERED ENDS |
| HOLE QUANTITY | 4 |
| MATERIAL DOCUMENT AND CLASSIFICATION | ASTM A108 ASSN STD SINGLE MATERIAL RESPONSE OR ASTM A576 ASSN STD SINGLE MATERIAL RESPONSE |
| MATERIAL | STEEL COMP 1015 OR STEEL COMP 1016 OR STEEL COMP 1017 OR STEEL COMP 1018 OR STEEL COMP 1019 OR STEEL COMP 1020 OR STEEL COMP 1021 OR STEEL COMP 1022 OR STEEL COMP 1023 OR STEEL COMP 1025 OR STEEL COMP 1026 |
| III PART NAME ASSIGNED BY CONTROLLING AGENCY | BRACKET, MULTIPLE ANGLE |
| PROPRIETARY CHARACTERISTICS | PACS |
| MOUNTING HOLE TYPE | COUNTERSUNK AND PLAIN |
| SECOND LEG END WIDTH | 1.44 INCHES MINIMUM AND 1.56 INCHES MAXIMUM |
| SECOND LEG HOLE DIAMETER | 0.500 INCHES MINIMUM AND 0.539 INCHES MAXIMUM |
| SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| SECOND LEG STYLE | ANGLE |
| SECOND LEG THICKNESS | 0.375 INCHES NOMINAL |
| SECOND LEG LENGTH | 5.75 INCHES MINIMUM AND 5.87 INCHES MAXIMUM |
| SECOND LEG WIDTH | 3.44 INCHES MINIMUM AND 3.56 INCHES MAXIMUM |
| SPECIAL FEATURES | THE MOUNTING HOLES ARE COUNTERSUNK TO .958 INCH DIAMETER BY 83 DEGREES. |
| STYLE DESIGNATOR | ANGLE |
| SURFACE TREATMENT | PAINT |
| FIRST LEG ANGLE | 65.5 DEGREES MINIMUM AND 75.5 DEGREES MAXIMUM |
| FIRST LEG HOLE ARRANGEMENT STYLE | NO HOLE |