| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 17.5 MILLIMETERS NOMINAL |
| FIRST LEG ANGLE | 10.5 DEGREES MINIMUM AND 13.5 DEGREES MAXIMUM |
| FIRST LEG HOLE DIAMETER | 13.7 MILLIMETERS MINIMUM AND 14.3 MILLIMETERS MAXIMUM |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 17.5 MILLIMETERS NOMINAL |
| FIRST LEG END RADIUS | 16.0 MILLIMETERS MINIMUM AND 19.0 MILLIMETERS MAXIMUM |
| FIRST LEG HOLE ARRANGEMENT STYLE | ONE HOLE |
| FIRST LEG THICKNESS | 6.4 MILLIMETERS NOMINAL |
| FIRST LEG WIDTH | 33.5 MILLIMETERS MINIMUM AND 36.5 MILLIMETERS MAXIMUM |
| FIRST LEG LENGTH | 48.1 MILLIMETERS MINIMUM AND 51.1 MILLIMETERS MAXIMUM |
| FIRST LEG STYLE | END RADIUS |
| MATERIAL DOCUMENT AND CLASSIFICATION | ASTM A240, CONDITION A, ASSN STD SINGLE MATERIAL RESPONSE |
| MATERIAL | STEEL COMP 304 OR STEEL COMP 316 |
| III PART NAME ASSIGNED BY CONTROLLING AGENCY | PLATE |
| PROPRIETARY CHARACTERISTICS | PACS |
| SECOND LEG CUTOUT LENGTH | 38.5 MILLIMETERS MINIMUM AND 41.5 MILLIMETERS MAXIMUM |
| SECOND LEG CUTOUT WIDTH | 20.3 MILLIMETERS MINIMUM AND 21.7 MILLIMETERS MAXIMUM |
| SECOND LEG HOLE ARRANGEMENT STYLE | NO HOLE |
| SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| SECOND LEG STYLE | SQUARE |
| SECOND LEG THICKNESS | 6.4 MILLIMETERS NOMINAL |
| SECOND LEG LENGTH | 51.3 MILLIMETERS MINIMUM AND 51.5 MILLIMETERS MAXIMUM |
| SECOND LEG WIDTH | 33.5 MILLIMETERS MINIMUM AND 36.5 MILLIMETERS MAXIMUM |
| STYLE DESIGNATOR | ANGLE |
| SURFACE TREATMENT | PAINT |