| FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 5.750 INCHES NOMINAL |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 2.130 INCHES NOMINAL |
| FIRST LEG ANGLE | 45.0 DEGREES NOMINAL |
| FIRST LEG CORNER RADIUS | 0.250 INCHES NOMINAL |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.500 INCHES NOMINAL |
| FIRST LEG HOLE ARRANGEMENT STYLE | TWO HOLES |
| FIRST LEG HOLE DIAMETER | 0.311 INCHES MINIMUM AND 0.314 INCHES MAXIMUM |
| FIRST LEG WIDTH | 4.500 INCHES NOMINAL |
| FIRST LEG LENGTH | 7.500 INCHES NOMINAL |
| FIRST LEG STYLE | CORNER RADIUS |
| FIRST LEG THICKNESS | 0.188 INCHES NOMINAL |
| HOLE QUANTITY | 4 |
| MATERIAL DOCUMENT AND CLASSIFICATION | ASTM B209 5052-H32 0.188 THK ASSN STD SINGLE MATERIAL RESPONSE |
| MATERIAL | ALUMINUM ALLOY 5052 |
| III PART NAME ASSIGNED BY CONTROLLING AGENCY | BRACKET, ANG;E, ASSEMBLY |
| PROPRIETARY CHARACTERISTICS | PACS |
| MOUNTING HOLE TYPE | PLAIN |
| SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG LENGTH | 3.000 INCHES NOMINAL |
| SECOND LEG ANGLE | 45.0 DEGREES NOMINAL |
| SECOND LEG CORNER RADIUS | 0.250 INCHES NOMINAL |
| SECOND LEG HOLE ARRANGEMENT STYLE | TWO HOLES |
| SECOND LEG HOLE DIAMETER | 0.340 INCHES NOMINAL |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.750 INCHES NOMINAL |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 1.250 INCHES NOMINAL |
| SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| SECOND LEG STYLE | CORNER RADIUS |
| SECOND LEG THICKNESS | 0.188 INCHES NOMINAL |
| SECOND LEG LENGTH | 2.400 INCHES NOMINAL |
| SECOND LEG WIDTH | 4.50 INCHES NOMINAL |
| STYLE DESIGNATOR | ANGLE |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-DTL-53022 TYPE 4 MIL SPEC 1ST TREATMENT RESPONSE AND MIL-DTL-53039 MIL SPEC 2ND TREATMENT RESPONSE |
| SURFACE TREATMENT | PRIMER EPOXY AND CARC (CHEMICAL AGENT RESISTANT COATING) |