| SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG LENGTH | 35.0 MILLIMETERS NOMINAL |
| SECOND LEG ANGLE | 3.0 RADIANS NOMINAL |
| SECOND LEG HOLE DIAMETER | 4.0 MILLIMETERS NOMINAL |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 10.0 MILLIMETERS NOMINAL |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 5.0 MILLIMETERS NOMINAL |
| SECOND LEG RELATIONSHIP TO FIRST LEG | IDENTICAL |
| SECOND LEG THICKNESS | 12.2 MILLIMETERS MINIMUM AND 12.8 MILLIMETERS MAXIMUM |
| SECOND LEG LENGTH | 50.0 MILLIMETERS NOMINAL |
| SECOND LEG WIDTH | 11.0 MILLIMETERS NOMINAL |
| STYLE DESIGNATOR | ADJACENT ANGLES |
| SURFACE TREATMENT | PAINT |
| DISTANCE BETWEEN HOLE CENTERS | 35.0 MILLIMETERS NOMINAL |
| CENTER SECTION THICKNESS | 18.0 MILLIMETERS NOMINAL |
| CENTER SECTION WIDTH | 12.0 MILLIMETERS NOMINAL |
| CENTER SECTION HEIGHT | 56.0 MILLIMETERS NOMINAL |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 10.0 MILLIMETERS NOMINAL |
| FIRST LEG ANGLE | 3.0 RADIANS NOMINAL |
| FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG LENGTH | 35.0 MILLIMETERS NOMINAL |
| FIRST LEG HOLE DIAMETER | 4.0 MILLIMETERS NOMINAL |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 5.0 MILLIMETERS NOMINAL |
| FIRST LEG HOLE ARRANGEMENT STYLE | TWO HOLES |
| FIRST LEG THICKNESS | 12.2 MILLIMETERS MINIMUM AND 12.8 MILLIMETERS MAXIMUM |
| FIRST LEG WIDTH | 11.0 MILLIMETERS NOMINAL |
| FIRST LEG LENGTH | 50.0 MILLIMETERS NOMINAL |
| FIRST LEG STYLE | SQUARE |
| HOLE QUANTITY | 5 |
| MATERIAL DOCUMENT AND CLASSIFICATION | ASTM A36/A36M ASSN STD SINGLE MATERIAL RESPONSE |
| MATERIAL | STEEL |
| PART NAME ASSIGNED BY CONTROLLING AGENCY | BLOCK |
| PROPRIETARY CHARACTERISTICS | PACS |
| MOUNTING HOLE TYPE | THREADED |