| CENTER SECTION HEIGHT | 0.028 INCHES MINIMUM AND 0.036 INCHES MAXIMUM |
| CENTER SECTION THICKNESS | 0.028 INCHES MINIMUM AND 0.036 INCHES MAXIMUM |
| CENTER SECTION WIDTH | 0.552 INCHES MAXIMUM |
| FIRST LEG HOLE ARRANGEMENT STYLE | NO HOLE |
| FIRST LEG ANGLE | 90.0 DEGREES NOMINAL |
| FIRST LEG LENGTH | 72.0 INCHES NOMINAL |
| FIRST LEG STYLE | SQUARE |
| FIRST LEG THICKNESS | 0.028 INCHES MINIMUM AND 0.036 INCHES MAXIMUM |
| FIRST LEG WIDTH | 0.298 INCHES MAXIMUM |
| MATERIAL DOCUMENT AND CLASSIFICATION | AMS5510 ASSN STD SINGLE MATERIAL RESPONSE |
| MATERIAL | STEEL CORROSION RESISTING |
| PART NAME ASSIGNED BY CONTROLLING AGENCY | GANG CHANNEL |
| SPECIAL FEATURES | BOTH LEGS HAVE SLIDES THAT ARE 0.08/0.09 WIDE BY 0.215/0.225 LONG ALONG THE LENGTH;HOLES ARE PLACED IN BRACKET TO ACCOMODATE NUTS;CENTER TO CENTER MEASUREMENT OF NUT HOLES IS 3.00 INCHES |
| SECOND LEG ANGLE | 90.0 DEGREES NOMINAL |
| SECOND LEG LENGTH | 72.0 INCHES NOMINAL |
| SECOND LEG RELATIONSHIP TO FIRST LEG | IDENTICAL |
| SECOND LEG THICKNESS | 0.028 INCHES MINIMUM AND 0.036 INCHES MAXIMUM |
| STYLE DESIGNATOR | ADJACENT ANGLES |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-S-5002 PLUS TWO COATS OF MIL-PRF-23377 TY I,CLASS C1 OR C2 MIL SPEC 1ST TREATMENT RESPONSE AND MIL-STD-7179 MIL SPEC 2ND TREATMENT RESPONSE |
| SURFACE TREATMENT | PASSIVATE AND PRIMER |