| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 2.295 INCHES NOMINAL |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 2.28 INCHES MINIMUM AND 2.32 INCHES MAXIMUM |
| FIRST LEG HOLE ARRANGEMENT STYLE | FOUR HOLES |
| FIRST LEG ANGLE | 90.0 DEGREES NOMINAL |
| FIRST LEG DISTANCE BETWEEN FIRST AND SECOND HOLE CENTERS ALONG WIDTH | 6.00 INCHES NOMINAL |
| FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 0.88 INCHES MINIMUM AND 0.92 INCHES MAXIMUM |
| FIRST LEG DISTANCE BETWEEN SECOND AND THIRD HOLE CENTERS ALONG WIDTH | 9.00 INCHES NOMINAL |
| FIRST LEG LENGTH | 25.34 INCHES NOMINAL |
| FIRST LEG STYLE | SQUARE |
| FIRST LEG THICKNESS | 0.125 INCHES NOMINAL |
| FIRST LEG WIDTH | 1.25 INCHES NOMINAL |
| FIRST LEG HOLE DIAMETER | 0.312 INCHES NOMINAL |
| HOLE QUANTITY | 4 |
| MATERIAL DOCUMENT AND CLASSIFICATION | ASTM B221 ASSN STD SINGLE MATERIAL RESPONSE |
| MATERIAL | ALUMINUM ALLOY 6063 |
| MOUNTING HOLE TYPE | PLAIN |
| SECOND LEG HOLE ARRANGEMENT STYLE | NO HOLE |
| SECOND LEG LENGTH | 25.34 INCHES NOMINAL |
| SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| SECOND LEG STYLE | SQUARE |
| SECOND LEG THICKNESS | 0.125 INCHES NOMINAL |
| SECOND LEG WIDTH | 1.25 INCHES NOMINAL |
| SPECIAL FEATURES | COLOR IS SEAFOAM GREEN;IDENTIFY IAW MIL-STD-130 BY RUBBER STAMP OR STENCIL |
| STYLE DESIGNATOR | ANGLE |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | CLEAN,PRETREAT,PRIME AND PAINT IAW 17-3-3208 MFR REF SINGLE TREATMENT RESPONSE |
| SURFACE TREATMENT | PRIMER AND PAINT |