|
|
|
National Stock Number:
5340-01-622-7115
Federal Supply Class:
5340
National Item Identification Number:
016227115
Description:
BRACKET,DOUBLE ANGLE
Detail:
A rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
|
Manufacturer Information:
| 162J631027-2003 | 98747 | OGDEN AIR LOGISTICS CENTER |
|
Techincal Specification:
| CENTER SECTION THICKNESS | 0.050 INCHES NOMINAL | | FIRST LEG HOLE DIAMETER | 0.575 INCHES MINIMUM AND 0.584 INCHES MAXIMUM | | FIRST LEG STYLE | SIDE RADIUS | | FIRST LEG THICKNESS | 0.050 INCHES NOMINAL | | HOLE QUANTITY | 4 | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS-QQ-A-250/13, COND. T6 ASSN STD SINGLE MATERIAL RESPONSE | | MATERIAL | ALUMINUM ALLOY 7075 | | PART NAME ASSIGNED BY CONTROLLING AGENCY | SUPPORT BRACKET, LE SLAT | | PROPRIETARY CHARACTERISTICS | PACS | | MOUNTING HOLE TYPE | PLAIN | | SPECIAL FEATURES | BRACKET HAS (4) TOTAL MOUNTING HOLES, (2) WITH A DIAMETER OF 0.575 - 0.584 INCHES AND (2) WITH A DIAMETER OF 0.098 - 0.104 INCHES. | | SECOND LEG HOLE ARRANGEMENT STYLE | NO HOLE | | SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL | | SECOND LEG STYLE | CUT OUT | | SECOND LEG THICKNESS | 0.050 INCHES NOMINAL | | STYLE DESIGNATOR | ADJACENT ANGLES | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-DTL-5541, CLASS 1A MIL SPEC SINGLE TREATMENT RESPONSE | | SURFACE TREATMENT | CHROMATE |
|
|