| FIRST LEG HOLE ARRANGEMENT STYLE | NO HOLE |
| FIRST LEG ANGLE | 90.0 DEGREES NOMINAL |
| FIRST LEG STYLE | SQUARE |
| FIRST LEG THICKNESS | 0.13 INCHES NOMINAL |
| FIRST LEG LENGTH | 1.47 INCHES MINIMUM AND 1.53 INCHES MAXIMUM |
| FIRST LEG WIDTH | 11.63 INCHES MINIMUM AND 11.69 INCHES MAXIMUM |
| MATERIAL DOCUMENT AND CLASSIFICATION | ASTM A36 ASSN STD SINGLE MATERIAL RESPONSE |
| MATERIAL | STEEL |
| MOUNTING HOLE TYPE | PLAIN |
| PART NAME ASSIGNED BY CONTROLLING AGENCY | BRACKET,ANGLE |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.81 INCHES NOMINAL |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.63 INCHES NOMINAL |
| SECOND LEG HOLE ARRANGEMENT STYLE | TWO HOLES |
| SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 10.37 INCHES NOMINAL |
| SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| SECOND LEG STYLE | SQUARE |
| SECOND LEG THICKNESS | 0.13 INCHES NOMINAL |
| SECOND LEG HOLE DIAMETER | 0.52 INCHES MINIMUM AND 0.55 INCHES MAXIMUM |
| SECOND LEG LENGTH | 1.47 INCHES MINIMUM AND 1.53 INCHES MAXIMUM |
| SECOND LEG WIDTH | 11.63 INCHES MINIMUM AND 11.69 INCHES MAXIMUM |
| SPECIAL FEATURES | PART SHALL BE PROMINANTLY MARKED WITH AN A1 USING FED-STD-595 GREY, BLACK 37030; LETTERS SHALL BE A MINIMUM OF 1 INCH HIGH |
| STYLE DESIGNATOR | ANGLE |