| DISTANCE BETWEEN MOUNTING HOLE CENTERS | 0.995 INCHES MINIMUM AND 1.005 INCHES MAXIMUM |
| CENTER TO CENTER DISTANCE BETWEEN CUP AND MOUNTING HOLE | 0.495 INCHES MINIMUM AND 0.505 INCHES MAXIMUM |
| MATERIAL THICKNESS | 0.050 INCHES NOMINAL |
| MATERIAL | STEEL |
| III PART NAME ASSIGNED BY CONTROLLING AGENCY | NUT,SELF-LOCKING,FLOATING TWO LUG,REPLACEABLE NUT |
| III SUPPLEMENTARY FEATURES | WIDTH BETWEEN CUP FLATS (BWRB) IS ROUND NOT FLAT |
| PROPRIETARY CHARACTERISTICS | PACS |
| MOUNTING HOLE DIAMETER | 0.130 INCHES MINIMUM AND 0.135 INCHES MAXIMUM |
| OVERALL HEIGHT | 0.560 INCHES MAXIMUM |
| OVERALL LENGTH | 1.292 INCHES MAXIMUM |
| OVERALL WIDTH | 0.760 INCHES MAXIMUM |
| SPECIAL FEATURES | SPECIFIC MATLS ARE: A286 IAW AMS5525 FOR THE SHELL; ASTM A313,TY XM-28,ARMCO NITRONIC 32 FOR THE CLIP AND A286 IAW AMS5525,AMS5732 OR AMS5737 FOR THE NUT; SPECIFIC FINISHES ARE: PASSIVATE IAW AMS2700 FOR THE SHELL AND CLIP, PASSIVATE AND AS5272 TY I DRY FILM LUBRICANT FOR THE NUT; THIS ITEM WILL ACCOMMODATE A THREADED FASTENER 0.375-24 UNJF-3A |
| WIDTH BETWEEN CUP FLATS | 0.479 INCHES MINIMUM |
| STYLE DESIGNATOR | ANCHOR |
| SURFACE TREATMENT | PASSIVATE |