| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.625 INCHES NOMINAL |
| FIRST LEG ANGLE | 90.0 DEGREES NOMINAL |
| FIRST LEG CHAMFER ANGLE | 45.0 DEGREES NOMINAL |
| FIRST LEG HOLE DIAMETER | 0.625 INCHES MINIMUM AND 0.638 INCHES MAXIMUM |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.750 INCHES NOMINAL |
| FIRST LEG END WIDTH | 1.10 INCHES MINIMUM AND 1.18 INCHES MAXIMUM |
| FIRST LEG HOLE ARRANGEMENT STYLE | ONE HOLE |
| FIRST LEG THICKNESS | 0.38 INCHES NOMINAL |
| FIRST LEG WIDTH | 0.146 INCHES MINIMUM AND 0.154 INCHES MAXIMUM |
| FIRST LEG LENGTH | 2.46 INCHES MINIMUM AND 2.54 INCHES MAXIMUM |
| FIRST LEG STYLE | CHAMFERED ENDS |
| MATERIAL | STEEL |
| PROPRIETARY CHARACTERISTICS | PACS |
| SPECIAL FEATURES | ASBESTOS, RADIOACTIVE, HEXAVALENT CHROMIUM (ELECTROPLATING/COATINGS),CADMIUM (ELECTROPLATING), OR OTHER HIGHLY TOXIC/CARCINOGENIC MATERIALS (DEFINED IN 29 CFR 1910.1200) NOT USED IN MFG/ASSEMBLY OF THIS COMPONENT. CLASS I & IIOZONE DEPLETING SUBSTANCES SHALL NOT BE USED. CLEAN WITH A DEOXIDIZING SOLUTION OTHER THAN CAUSTIC DIP. |
| SECOND LEG CHAMFER ANGLE | 45.0 DEGREES NOMINAL |
| SECOND LEG END WIDTH | 1.10 INCHES MINIMUM AND 1.18 INCHES MAXIMUM |
| SECOND LEG HOLE ARRANGEMENT STYLE | ONE HOLE |
| SECOND LEG HOLE DIAMETER | 0.625 INCHES MINIMUM AND 0.638 INCHES MAXIMUM |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.625 INCHES NOMINAL |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.75 INCHES NOMINAL |
| SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| SECOND LEG STYLE | CHAMFERED ENDS |
| SECOND LEG THICKNESS | 0.38 INCHES NOMINAL |
| SECOND LEG WIDTH | 0.146 INCHES MINIMUM AND 0.154 INCHES MAXIMUM |
| SECOND LEG LENGTH | 2.96 INCHES MINIMUM AND 3.04 INCHES MAXIMUM |
| STYLE DESIGNATOR | ANGLE |