| FIRST LEG ANGLE | 0.090 RADIANS NOMINAL |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.440 INCHES NOMINAL |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.540 INCHES NOMINAL |
| FIRST LEG END WIDTH | 0.070 INCHES MINIMUM AND 1.030 INCHES MAXIMUM |
| FIRST LEG HOLE ARRANGEMENT STYLE | ONE HOLE |
| FIRST LEG CHAMFER ANGLE | 40.0 DEGREES MINIMUM AND 50.0 DEGREES MAXIMUM |
| FIRST LEG STYLE | CHAMFERED ENDS |
| FIRST LEG THICKNESS | 0.065 INCHES NOMINAL |
| FIRST LEG WIDTH | 1.090 INCHES NOMINAL |
| FIRST LEG HOLE DIAMETER | 0.436 INCHES MINIMUM AND 0.453 INCHES MAXIMUM |
| FIRST LEG LENGTH | 0.880 INCHES NOMINAL |
| MATERIAL DOCUMENT AND CLASSIFICATION | ASTMA569 ASSN STD SINGLE MATERIAL RESPONSE |
| MATERIAL | STEEL |
| MOUNTING HOLE TYPE | PLAIN |
| PART NAME ASSIGNED BY CONTROLLING AGENCY | BRACKET, ELECTRICAL CONNECTOR |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.656 INCHES NOMINAL |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.4375 INCHES NOMINAL |
| SECOND LEG HOLE ARRANGEMENT STYLE | 2 SLOTS |
| SECOND LEG CUTOUT LENGTH | 0.750 INCHES NOMINAL |
| SECOND LEG CUTOUT WIDTH | 1.125 INCHES NOMINAL |
| SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 2.375 INCHES NOMINAL |
| SECOND LEG LENGTH | 3.880 INCHES NOMINAL |
| SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| SECOND LEG SLOT LENGTH | 0.500 INCHES NOMINAL |
| SECOND LEG SLOT WIDTH | 0.312 INCHES NOMINAL |
| SECOND LEG STYLE | CUT OUT |
| SECOND LEG THICKNESS | 0.065 INCHES NOMINAL |
| SECOND LEG WIDTH | 3.250 INCHES NOMINAL |
| STYLE DESIGNATOR | ANGLE |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416 ASSN STD SINGLE TREATMENT RESPONSE |
| SURFACE TREATMENT | CADMIUM |
| SPECIAL FEATURES | TWO 0.164 INCH MOUNTING HOLES IN SECOND LEG |