| FIRST LEG ANGLE | 0.34 RADIANS MINIMUM AND 0.42 RADIANS MAXIMUM |
| FIRST LEG CORNER RADIUS | 0.21 INCHES MINIMUM AND 0.29 INCHES MAXIMUM |
| FIRST LEG HOLE DIAMETER | 0.625 INCHES MINIMUM AND 0.638 INCHES MAXIMUM |
| FIRST LEG WIDTH | 4.94 INCHES MINIMUM AND 5.06 INCHES MAXIMUM |
| FIRST LEG LENGTH | 4.73 INCHES MINIMUM AND 4.81 INCHES MAXIMUM |
| FIRST LEG STYLE | CORNER RADIUS |
| FIRST LEG THICKNESS | 0.25 INCHES NOMINAL |
| MATERIAL DOCUMENT AND CLASSIFICATION | ASTM A36/1 36M ASSN STD SINGLE MATERIAL RESPONSE |
| MATERIAL | STEEL |
| PART NAME ASSIGNED BY CONTROLLING AGENCY | L BRACKET |
| PROPRIETARY CHARACTERISTICS | PACS |
| SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 3.00 INCHES NOMINAL |
| SECOND LEG CORNER RADIUS | 0.21 INCHES MINIMUM AND 0.29 INCHES MAXIMUM |
| SECOND LEG HOLE ARRANGEMENT STYLE | 2 SLOTS |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 1.5 INCHES NOMINAL |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.96 INCHES MINIMUM AND 1.04 INCHES MAXIMUM |
| SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| SECOND LEG SLOT LENGTH | 1.38 INCHES NOMINAL |
| SECOND LEG SLOT WIDTH | 0.63 INCHES NOMINAL |
| SECOND LEG STYLE | CORNER RADIUS |
| SECOND LEG THICKNESS | 0.25 INCHES NOMINAL |
| SECOND LEG LENGTH | 5.69 INCHES MINIMUM AND 5.77 INCHES MAXIMUM |
| SECOND LEG WIDTH | 4.94 INCHES MINIMUM AND 5.06 INCHES MAXIMUM |
| STYLE DESIGNATOR | ANGLE |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-P-53022 TYPE 2 MIL SPEC 1ST TREATMENT RESPONSE AND MIL-DTL-5309 TYPE 2 MIL SPEC 2ND TREATMENT RESPONSE |
| SURFACE TREATMENT | PRIMER EPOXY AND PLASTIC POLYURETHANE |