| FIRST LEG HOLE DIAMETER | 0.119 INCHES MINIMUM AND 0.139 INCHES MAXIMUM |
| FIRST LEG WIDTH | 0.500 INCHES NOMINAL |
| FIRST LEG STYLE | ANGLE |
| FIRST LEG THICKNESS | 0.060 INCHES NOMINAL |
| MATERIAL DOCUMENT AND CLASSIFICATION | ASTM QQ-A-250/8 ASSN STD SINGLE MATERIAL RESPONSE |
| MATERIAL | ALUMINUM ALLOY 5052 |
| PART NAME ASSIGNED BY CONTROLLING AGENCY | BRACKET, GPS CABLE |
| PROPRIETARY CHARACTERISTICS | PACS |
| MOUNTING HOLE TYPE | COUNTERSUNK AND PLAIN |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.250 INCHES NOMINAL |
| SECOND LEG HOLE ARRANGEMENT STYLE | ONE HOLE |
| SECOND LEG HOLE DIAMETER | 0.253 INCHES MINIMUM AND 0.257 INCHES MAXIMUM |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.250 INCHES NOMINAL |
| SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| SECOND LEG STYLE | SQUARE |
| SECOND LEG THICKNESS | 0.060 INCHES NOMINAL |
| SECOND LEG WIDTH | 0.500 INCHES NOMINAL |
| SECOND LEG LENGTH | 0.750 INCHES NOMINAL |
| SPECIAL FEATURES | THE COUNTERSINK DIAMETER OF HOLES IN FIRST LEG IS 0.225 IN (NOM), AND THE COUNTERSINK ANGLE IS 82.0 DEGREES (NOM);HOLE IN SECOND LEG HAS A FLAT SIDE, AND IN INCHES WIDTH FROM FLAT TO ROUNDED SIDE IS 0.240 (MIN) AND 0.244 (MAX) |
| STYLE DESIGNATOR | ANGLE |
| FIRST LEG ANGLE | 0.060 RADIANS NOMINAL |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.125 INCHES NOMINAL |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.250 INCHES NOMINAL |
| FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG LENGTH | 0.400 INCHES NOMINAL |
| FIRST LEG LENGTH | 0.620 INCHES NOMINAL |
| FIRST LEG HOLE ARRANGEMENT STYLE | TWO HOLES |