| FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 90.0 MILLIMETERS NOMINAL |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 17.8 MILLIMETERS NOMINAL |
| FIRST LEG ANGLE | 8.0 DEGREES MINIMUM AND 11.0 DEGREES MAXIMUM |
| FIRST LEG CORNER RADIUS | 8.5 MILLIMETERS MINIMUM AND 11.5 MILLIMETERS MAXIMUM |
| FIRST LEG HOLE DIAMETER | 10.9 MILLIMETERS MINIMUM AND 11.2 MILLIMETERS MAXIMUM |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 30.0 MILLIMETERS NOMINAL |
| FIRST LEG HOLE ARRANGEMENT STYLE | TWO HOLES |
| FIRST LEG THICKNESS | 4.8 MILLIMETERS NOMINAL |
| FIRST LEG WIDTH | 148.5 MILLIMETERS MINIMUM AND 151.5 MILLIMETERS MAXIMUM |
| FIRST LEG LENGTH | 68.3 MILLIMETERS MINIMUM AND 71.3 MILLIMETERS MAXIMUM |
| FIRST LEG STYLE | CORNER RADIUS |
| MATERIAL DOCUMENT AND CLASSIFICATION | ASTM B209 ASSN STD SINGLE MATERIAL RESPONSE |
| MATERIAL THICKNESS | 4.8 MILLIMETERS NOMINAL |
| MATERIAL | ALUMINUM ALLOY 5052 |
| PART NAME ASSIGNED BY CONTROLLING AGENCY | BRACKET, EPA SIA |
| PROPRIETARY CHARACTERISTICS | PACS |
| MOUNTING HOLE TYPE | PLAIN |
| SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG LENGTH | 64.3 MILLIMETERS NOMINAL |
| SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 125.4 MILLIMETERS NOMINAL |
| SECOND LEG CORNER RADIUS | 8.5 MILLIMETERS MINIMUM AND 11.5 MILLIMETERS MAXIMUM |
| SECOND LEG HOLE ARRANGEMENT STYLE | FOUR HOLES |
| SECOND LEG HOLE DIAMETER | 6.4 MILLIMETERS MINIMUM AND 6.6 MILLIMETERS MAXIMUM |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 21.3 MILLIMETERS NOMINAL |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 14.3 MILLIMETERS NOMINAL |
| SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| SECOND LEG STYLE | CORNER RADIUS |
| SECOND LEG THICKNESS | 4.8 MILLIMETERS NOMINAL |
| SECOND LEG LENGTH | 108.5 MILLIMETERS MINIMUM AND 111.5 MILLIMETERS MAXIMUM |
| SECOND LEG WIDTH | 148.5 MILLIMETERS MINIMUM AND 151.5 MILLIMETERS MAXIMUM |
| STYLE DESIGNATOR | ANGLE |
| SURFACE TREATMENT | PAINT |