| OVERALL LENGTH | 4.22 INCHES MINIMUM AND |
| 4.32 INCHES MAXIMUM |
| STYLE DESIGNATOR | RECTANGULAR |
| OVERALL WIDTH | 1.45 INCHES MINIMUM AND |
| 1.55 INCHES MAXIMUM |
| OVERALL HEIGHT | 2.31 INCHES NOMINAL |
| MATERIAL | PLASTIC POLYPROPYLENE AND |
| STEEL |
| MATERIAL DOCUMENT AND CLASSIFICATION | ASTM A36 ASSN STD 2ND MATERIAL RESPONSE |
| DISTANCE FROM CENTER OF MOUNTING HOLE TO EDGE ALONG THE WIDTH | 0.745 INCHES MINIMUM AND |
| 0.755 INCHES MAXIMUM |
| CENTER TO CENTER DISTANCE BETWEEN FIRST AND SECOND MOUNTING HOLES | 3.639 INCHES MINIMUM AND |
| 3.649 INCHES MAXIMUM |
| BLOCK HEIGHT | 0.95 INCHES MINIMUM AND |
| 1.05 INCHES MAXIMUM |
| DISTANCE FROM END TO FIRST MOUNTING HOLE CENTER | 0.307 INCHES MINIMUM AND |
| 0.317 INCHES MAXIMUM |
| DISTANCE FROM END TO FIRST CLAMPING HOLE CENTER | 0.940 INCHES MINIMUM AND |
| 0.950 INCHES MAXIMUM |
| CENTER TO CENTER DISTANCE BETWEEN FIRST AND SECOND CLAMPING HOLES | 0.975 INCHES MINIMUM AND |
| 0.985 INCHES MAXIMUM |
| MOUNTING FACILITY | UNTHREADED HOLE |
| MOUNTING HOLE DIAMETER | 0.370 INCHES MINIMUM AND |
| 0.380 INCHES MAXIMUM |
| MOUNTING HOLE QUANTITY | 2 |
| CLAMPING HOLE QUANTITY | 2 |
| CLAMPING HOLE DIAMETER | 0.640 INCHES NOMINAL FIRST HOLE |
| 0.820 INCHES NOMINAL SECOND HOLE |
| SPECIAL FEATURES | ITEM CONSISTS OF (2) 10004P0429-001 MATERIAL IS BLACK OR WHITE POLYPROPYLENE AND (1) 10004P0429-002 MATERIAL IS STEEL WITH CHEMICAL AGENT RESISTANT COATING (CARC) PER MIL-DTL-53702, WITH A TOP COAT PER MIL-DTL-64159 GREEN 383 COLOR NO. 34094. THE STEEL PLATE IS TO BE MOUNTED ON THE TOP OF THE (2) POLYPROPYLENE PARTS. |
| PART NAME ASSIGNED BY CONTROLLING AGENCY | CLAMP, UNDER HULL 1 |