|
|
|
National Stock Number:
5340-01-615-4361
Federal Supply Class:
5340
National Item Identification Number:
016154361
Description:
BRACKET,DOUBLE ANGLE
Detail:
A rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
|
Manufacturer Information:
| 10004K0506 | 01365 | MARINE CORPS LOGISTICS COMMAND TECHNICAL DATA REPOSITORY CUSTOMER SERVICE-MICC LOGISTICS OPERATIONS CENTER |
|
Techincal Specification:
| CENTER SECTION HEIGHT | 1.27 INCHES NOMINAL | | CENTER SECTION THICKNESS | 0.125 INCHES NOMINAL | | CENTER SECTION WIDTH | 2.17 INCHES NOMINAL | | FIRST LEG ANGLE | 60.0 DEGREES NOMINAL | | FIRST LEG CHAMFER ANGLE | 45.0 DEGREES NOMINAL | | FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.633 INCHES NOMINAL | | FIRST LEG END WIDTH | 1.32 INCHES NOMINAL | | FIRST LEG HOLE ARRANGEMENT STYLE | ONE HOLE | | FIRST LEG HOLE DIAMETER | 0.375 INCHES NOMINAL | | FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.845 INCHES NOMINAL | | FIRST LEG STYLE | CHAMFERED ENDS | | FIRST LEG THICKNESS | 0.125 INCHES NOMINAL | | FIRST LEG WIDTH | 1.50 INCHES NOMINAL | | FIRST LEG LENGTH | 1.75 INCHES NOMINAL | | MATERIAL | ALUMINUM ALLOY 5052 | | SECOND LEG ANGLE | 60.0 DEGREES NOMINAL | | SECOND LEG CHAMFER ANGLE | 45.0 DEGREES NOMINAL | | SECOND LEG END WIDTH | 1.99 INCHES NOMINAL | | SECOND LEG HOLE ARRANGEMENT STYLE | ONE HOLE | | SECOND LEG HOLE DIAMETER | 0.578 INCHES NOMINAL | | SECOND LEG LENGTH | 1.11 INCHES NOMINAL | | SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.587 INCHES NOMINAL | | SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 1.666 INCHES NOMINAL | | SECOND LEG THICKNESS | 0.125 INCHES NOMINAL | | SECOND LEG WIDTH | 2.17 INCHES NOMINAL | | SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL | | SECOND LEG STYLE | CHAMFERED ENDS | | SPECIAL FEATURES | ONE SIDE OF BOTH CENTER SECTION AND 2ND LEG ARE BENT DOWN AT 90%. THE MEASUREMENTS ABOVE FIT THE FLAT PATTERN. AFTER THE BEND, BOTH OF THESE SECTIONS WILL BE 1.75 INCH WIDE. | | STYLE DESIGNATOR | DOUBLE ANGLE |
|
|