| FIRST LEG WIDTH | 0.620 INCHES NOMINAL |
| FIRST LEG STYLE | SQUARE |
| FIRST LEG THICKNESS | 0.250 INCHES NOMINAL |
| MATERIAL | ALUMINUM ALLOY 6063 |
| PART NAME ASSIGNED BY CONTROLLING AGENCY | BRACKET |
| PROPRIETARY CHARACTERISTICS | PACS |
| MOUNTING HOLE TYPE | COUNTERBORED AND COUNTERSUNK |
| SECOND LEG HOLE ARRANGEMENT STYLE | ONE HOLE |
| SECOND LEG HOLE DIAMETER | 0.437 INCHES NOMINAL |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.375 INCHES NOMINAL |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.310 INCHES NOMINAL |
| SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| SECOND LEG STYLE | SQUARE |
| SECOND LEG THICKNESS | 0.250 INCHES NOMINAL |
| SECOND LEG WIDTH | 0.620 INCHES NOMINAL |
| SECOND LEG LENGTH | 1.125 INCHES NOMINAL |
| SPECIAL FEATURES | FIRST LEG HOLES COUNTERBORED 0.375 X 0.188 DEPTH. SECOND LEG HOLE COUNTERSUNK 82 DEG |
| STYLE DESIGNATOR | ANGLE |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-A-8625, TY III, CL 2 MIL STD SINGLE TREATMENT RESPONSE |
| SURFACE TREATMENT | ANODIZE |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.438 INCHES NOMINAL |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.310 INCHES NOMINAL |
| FIRST LEG ANGLE | 90.0 DEGREES NOMINAL |
| FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG LENGTH | 0.438 INCHES NOMINAL |
| FIRST LEG LENGTH | 2.000 INCHES NOMINAL |
| FIRST LEG HOLE ARRANGEMENT STYLE | TWO HOLES |
| FIRST LEG HOLE DIAMETER | 0.228 INCHES NOMINAL |