| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.30 INCHES NOMINAL |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.25 INCHES NOMINAL |
| FIRST LEG ANGLE | 90.0 DEGREES NOMINAL |
| FIRST LEG CHAMFER ANGLE | 45.0 DEGREES NOMINAL |
| FIRST LEG HOLE DIAMETER | 2.54 INCHES MINIMUM AND 2.58 INCHES MAXIMUM |
| FIRST LEG LENGTH | 0.75 INCHES NOMINAL |
| FIRST LEG END WIDTH | 0.4293 INCHES NOMINAL |
| FIRST LEG HOLE ARRANGEMENT STYLE | ONE HOLE |
| FIRST LEG WIDTH | 0.50 INCHES NOMINAL |
| FIRST LEG STYLE | CHAMFERED ENDS |
| FIRST LEG THICKNESS | 0.06 INCHES NOMINAL |
| MATERIAL | ALUMINUM ALLOY 5052 |
| PROPRIETARY CHARACTERISTICS | PACS |
| SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 0.213 INCHES NOMINAL |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.13 INCHES NOMINAL |
| SECOND LEG CHAMFER ANGLE | 45.0 DEGREES NOMINAL |
| SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG LENGTH | 0.213 INCHES NOMINAL |
| SECOND LEG HOLE ARRANGEMENT STYLE | TWO HOLES |
| SECOND LEG HOLE DIAMETER | 0.124 INCHES MINIMUM AND 0.134 INCHES MAXIMUM |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.14 INCHES NOMINAL |
| SECOND LEG END WIDTH | 0.4293 INCHES NOMINAL |
| SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| SECOND LEG STYLE | CHAMFERED ENDS |
| SECOND LEG THICKNESS | 0.06 INCHES NOMINAL |
| SECOND LEG WIDTH | 0.50 INCHES NOMINAL |
| SECOND LEG LENGTH | 0.75 INCHES NOMINAL |
| SPECIAL FEATURES | ONE SIDE OF HOLE TOWARD THE CHAMFERED END OF THE 1ST LEG HAS BEEN REMOVED (HOLE IS D SHAPED) MAKING THE DIAMETER OF THAT PORTION ONLY 0.236 MIN/0.240 MAX. |
| STYLE DESIGNATOR | ANGLE |