| FIRST LEG ANGLE | 0.330 RADIANS MINIMUM AND 0.390 RADIANS MAXIMUM |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 1.565 INCHES NOMINAL |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 1.955 INCHES NOMINAL |
| FIRST LEG SLOT LENGTH | 0.670 INCHES MINIMUM AND 0.730 INCHES MAXIMUM |
| FIRST LEG SLOT WIDTH | 0.433 INCHES MINIMUM AND 0.443 INCHES MAXIMUM |
| FIRST LEG STYLE | CHAMFERED ENDS |
| FIRST LEG THICKNESS | 0.188 INCHES NOMINAL |
| FIRST LEG LENGTH | 2.260 INCHES MINIMUM AND 2.320 INCHES MAXIMUM |
| MATERIAL DOCUMENT AND CLASSIFICATION | ASTM A 514 ASSN STD SINGLE MATERIAL RESPONSE AND ASTM A 36 ASSN STD SINGLE MATERIAL RESPONSE AND ASTM D 2000 ASSN STD SINGLE MATERIAL RESPONSE |
| MATERIAL | STEEL AND RUBBER NEOPRENE |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 4.415 INCHES MINIMUM AND 4.475 INCHES MAXIMUM |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 4.765 INCHES MINIMUM AND 4.825 INCHES MAXIMUM |
| SECOND LEG END WIDTH | 4.720 INCHES MINIMUM AND 4.780 INCHES MAXIMUM |
| SECOND LEG HOLE ARRANGEMENT STYLE | ONE SLOT |
| SECOND LEG CHAMFER ANGLE | 0.970 RADIANS MINIMUM AND 1.030 RADIANS MAXIMUM |
| SECOND LEG LENGTH | 5.900 INCHES MINIMUM AND 5.960 INCHES MAXIMUM |
| SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| SECOND LEG SLOT LENGTH | 0.670 INCHES MINIMUM AND 0.730 INCHES MAXIMUM |
| SECOND LEG SLOT WIDTH | 0.433 INCHES MINIMUM AND 0.443 INCHES MAXIMUM |
| SECOND LEG STYLE | CHAMFERED ENDS |
| SECOND LEG THICKNESS | 0.660 INCHES MINIMUM AND 0.720 INCHES MAXIMUM |
| SECOND LEG WIDTH | 6.720 INCHES MINIMUM AND 6.780 INCHES MAXIMUM |
| SPECIAL FEATURES | HAS 4 WELDING PADS LOCATED IN DIAMOND FORMATION ON LEG 2; WELDING PADS ARE 1.0 INCHES IN DIAMETER AND 0.63 INCHES IN HEIGHT; HAS 2 RUBBER PADS MOUNTED ON TOP AND BOTTOM POSITIONED WELDING PADS OF DIAMOND FORMATION;RUBBER PADS ARE 0.75 INCHES IN DIAMETER AND 0.1875 INCHES IN HEIGHT |
| STYLE DESIGNATOR | ANGLE |