| FIRST LEG ANGLE | 0.16 RADIANS MINIMUM AND 0.22 RADIANS MAXIMUM |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.480 INCHES MINIMUM AND 0.520 INCHES MAXIMUM |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.360 INCHES MINIMUM AND 0.400 INCHES MAXIMUM |
| FIRST LEG HOLE ARRANGEMENT STYLE | TWO HOLES |
| FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 1.250 INCHES NOMINAL |
| FIRST LEG STYLE | SQUARE |
| FIRST LEG THICKNESS | 0.125 INCHES NOMINAL |
| FIRST LEG HOLE DIAMETER | 0.326 INCHES MINIMUM AND 0.333 INCHES MAXIMUM |
| FIRST LEG LENGTH | 1.010 INCHES MINIMUM AND 1.070 INCHES MAXIMUM |
| FIRST LEG WIDTH | 2.000 INCHES NOMINAL |
| MATERIAL | STEEL CORROSION RESISTING |
| PART NAME ASSIGNED BY CONTROLLING AGENCY | BRACKET, MOUNTING |
| SECOND LEG LENGTH | 5.500 INCHES NOMINAL |
| SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| SECOND LEG STYLE | SQUARE |
| SECOND LEG THICKNESS | 0.125 INCHES NOMINAL |
| SECOND LEG WIDTH | 2.000 INCHES NOMINAL |
| SPECIAL FEATURES | IN SECOND LEG THERE ARE 9 HOLES AS FOLLOWS, FOUR 0.128 INCH (NOM) THROUGH HOLES;ONE 1.190 INCH (NOM) HOLE;AND FOUR 0.089 INCH (NOM) THREADED (4-40 NC-2B) HOLES |
| SURFACE TREATMENT | ANODIZE |