| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 1.750 INCHES NOMINAL |
| SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| SECOND LEG STYLE | SQUARE |
| SECOND LEG THICKNESS | 0.231 INCHES NOMINAL |
| SECOND LEG LENGTH | 2.000 INCHES NOMINAL |
| SECOND LEG WIDTH | 8.500 INCHES NOMINAL |
| STYLE DESIGNATOR | ADJACENT ANGLES |
| SURFACE TREATMENT | PRIMER AND PAINT |
| CENTER SECTION WIDTH | 8.500 INCHES NOMINAL |
| CENTER SECTION HEIGHT | 4.000 INCHES NOMINAL |
| CENTER SECTION THICKNESS | 0.231 INCHES NOMINAL |
| FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 5.905 INCHES NOMINAL |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.965 INCHES NOMINAL |
| FIRST LEG LENGTH | 2.000 INCHES NOMINAL |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.813 INCHES NOMINAL |
| FIRST LEG HOLE ARRANGEMENT STYLE | 2 SLOTS |
| FIRST LEG SLOT LENGTH | 0.500 INCHES NOMINAL |
| FIRST LEG SLOT WIDTH | 0.374 INCHES MINIMUM AND 0.385 INCHES MAXIMUM |
| FIRST LEG STYLE | SQUARE |
| FIRST LEG THICKNESS | 0.231 INCHES NOMINAL |
| FIRST LEG WIDTH | 8.500 INCHES NOMINAL |
| HOLE QUANTITY | 4 |
| MATERIAL DOCUMENT AND CLASSIFICATION | ASTM B308 ASSN STD SINGLE MATERIAL RESPONSE |
| MATERIAL THICKNESS | 0.231 INCHES NOMINAL |
| MATERIAL | ALUMINUM ALLOY 6061 |
| PART NAME ASSIGNED BY CONTROLLING AGENCY | BRACKET, SUPPORT, HEATER, TAN |
| PROPRIETARY CHARACTERISTICS | PACS |
| MOUNTING HOLE TYPE | PLAIN |
| SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 5.905 INCHES NOMINAL |
| SECOND LEG DISTANCE BETWEEN FIRST AND SECOND HOLE CENTERS ALONG WIDTH | 5.905 INCHES NOMINAL |
| SECOND LEG HOLE ARRANGEMENT STYLE | TWO HOLES |
| SECOND LEG HOLE DIAMETER | 0.436 INCHES MINIMUM AND 0.447 INCHES MAXIMUM |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 1.250 INCHES NOMINAL |