|
|
|
National Stock Number:
5340-01-609-1354
Federal Supply Class:
5340
National Item Identification Number:
016091354
Description:
BRACKET,DOUBLE ANGLE
Detail:
A rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
|
Manufacturer Information:
| 17-2-0908 | 81337 | W1D1 NATICK SOLDIER CENTER | | 17-2-0908-1 | 81337 | W1D1 NATICK SOLDIER CENTER |
|
Techincal Specification:
| DISTANCE BETWEEN HOLE CENTERS | 3.810 INCHES NOMINAL | | CENTER SECTION WIDTH | 16.600 INCHES NOMINAL | | CENTER SECTION HEIGHT | 1.380 INCHES MINIMUM AND 1.500 INCHES MAXIMUM | | CENTER SECTION THICKNESS | 0.063 INCHES NOMINAL | | FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 3.810 INCHES NOMINAL | | FIRST LEG LENGTH | 1.000 INCHES NOMINAL | | FIRST LEG HOLE DIAMETER | 0.129 INCHES MINIMUM AND 0.133 INCHES MAXIMUM | | FIRST LEG WIDTH | 16.600 INCHES NOMINAL | | FIRST LEG STYLE | SQUARE | | FIRST LEG THICKNESS | 0.063 INCHES NOMINAL | | HOLE QUANTITY | 10 | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-250/8 FED SPEC SINGLE MATERIAL RESPONSE OR ASTM B209 ASSN STD SINGLE MATERIAL RESPONSE | | MATERIAL | ALUMINUM ALLOY 5052 | | PART NAME ASSIGNED BY CONTROLLING AGENCY | OUTLET, HOUSING, BOTTOM | | PROPRIETARY CHARACTERISTICS | PACS | | MOUNTING HOLE DIAMETER | 0.129 INCHES MINIMUM AND 0.133 INCHES MAXIMUM | | MOUNTING HOLE TYPE | PLAIN | | SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 3.810 INCHES NOMINAL | | SECOND LEG HOLE DIAMETER | 0.129 INCHES MINIMUM AND 0.133 INCHES MAXIMUM | | SECOND LEG RELATIONSHIP TO FIRST LEG | IDENTICAL | | SECOND LEG STYLE | SQUARE | | SECOND LEG THICKNESS | 0.063 INCHES NOMINAL | | SECOND LEG LENGTH | 1.000 INCHES NOMINAL | | SECOND LEG WIDTH | 16.600 INCHES NOMINAL | | STYLE DESIGNATOR | ADJACENT ANGLES | | SURFACE TREATMENT | PAINT |
|
|