| FIRST LEG ANGLE | 5.0 DEGREES MINIMUM AND 8.0 DEGREES MAXIMUM |
| FIRST LEG HOLE DIAMETER | 7.2 MILLIMETERS MINIMUM AND 7.4 MILLIMETERS MAXIMUM |
| FIRST LEG END RADIUS | 10.5 MILLIMETERS MINIMUM AND 13.5 MILLIMETERS MAXIMUM |
| FIRST LEG HOLE ARRANGEMENT STYLE | FOUR HOLES |
| FIRST LEG THICKNESS | 4.8 MILLIMETERS NOMINAL |
| FIRST LEG LENGTH | 33.4 MILLIMETERS MINIMUM AND 36.1 MILLIMETERS MAXIMUM |
| FIRST LEG STYLE | END RADIUS |
| FIRST LEG WIDTH | 72.5 MILLIMETERS MINIMUM AND 75.5 MILLIMETERS MAXIMUM |
| MATERIAL DOCUMENT AND CLASSIFICATION | ASTM A36 ASSN STD SINGLE MATERIAL RESPONSE |
| MATERIAL | STEEL |
| PART NAME ASSIGNED BY CONTROLLING AGENCY | BRACKET, SOLENOID |
| PROPRIETARY CHARACTERISTICS | PACS |
| MOUNTING HOLE TYPE | PLAIN |
| SECOND LEG CUTOUT WIDTH | 38.5 MILLIMETERS MINIMUM AND 41.5 MILLIMETERS MAXIMUM |
| SECOND LEG HOLE ARRANGEMENT STYLE | TWO HOLES |
| SECOND LEG HOLE DIAMETER | 6.8 MILLIMETERS MINIMUM AND 7.0 MILLIMETERS MAXIMUM |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 15.8 MILLIMETERS MINIMUM AND 18.5 MILLIMETERS MAXIMUM |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 15.8 MILLIMETERS MINIMUM AND 18.5 MILLIMETERS MAXIMUM |
| SECOND LEG END RADIUS | 4.5 MILLIMETERS MINIMUM AND 7.5 MILLIMETERS MAXIMUM |
| SECOND LEG LENGTH | 87.4 MILLIMETERS MINIMUM AND 90.4 MILLIMETERS MAXIMUM |
| SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| SECOND LEG STYLE | END RADIUS |
| SECOND LEG THICKNESS | 4.8 MILLIMETERS NOMINAL |
| SECOND LEG WIDTH | 72.5 MILLIMETERS MINIMUM AND 75.5 MILLIMETERS MAXIMUM |
| STYLE DESIGNATOR | ANGLE |
| SURFACE TREATMENT | PAINT |