|
|
|
National Stock Number:
5340-01-604-6657
Federal Supply Class:
5340
National Item Identification Number:
016046657
Description:
STANDOFF,THREADED,SPACING
Detail:
A standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
|
Manufacturer Information:
| 4826376-1 | 88277 | THE BOEING COMPANY |
|
Techincal Specification:
| MATERIAL | COPPER ALLOY OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-B-679 FED SPEC SINGLE MATERIAL RESPONSE OVERALL | | CROSS-SECTIONAL SHAPE | RECTANGULAR | | CROSS-SECTIONAL LENGTH | 1.329 INCHES MINIMUM AND | | 1.359 INCHES MAXIMUM | | CROSS-SECTIONAL WIDTH | 0.735 INCHES MINIMUM AND | | 0.765 INCHES MAXIMUM | | STYLE DESIGNATOR | PROJECTION BOTH ENDS | | LENGTH | 0.11 INCHES MINIMUM AND | | 0.14 INCHES MAXIMUM | | LEFT PROJECTION DIAMETER | 0.621 INCHES MINIMUM AND | | 0.624 INCHES MAXIMUM | | LEFT PROJECTION LENGTH | 0.567 INCHES MINIMUM AND | | 0.573 INCHES MAXIMUM | | RIGHT PROJECTION DIAMETER | 0.735 INCHES MINIMUM AND | | 0.765 INCHES MAXIMUM | | RIGHT PROJECTION LENGTH | 0.649 INCHES NOMINAL | | LEFT END CHAMFER ANGLE | 44.5 DEGREES MINIMUM AND | | 45.5 DEGREES MAXIMUM | | RIGHT END CHAMFER ANGLE | 44.5 DEGREES MINIMUM AND | | 45.5 DEGREES MAXIMUM | | FLANGE HOLE QUANTITY | 4 | | THREAD SERIES DESIGNATOR | ACME LEFT INTERNAL (INCLUDES THRU THREAD) | | NOMINAL THREAD SIZE | 0.50 INCHES LEFT INTERNAL (INCLUDES THRU THREAD) | | THREAD QUANTITY PER INCH | 10 LEFT INTERNAL (INCLUDES THRU THREAD) | | THREAD CLASS | 2G LEFT INTERNAL (INCLUDES THRU THREAD) | | THREAD DIRECTION | RIGHT-HAND LEFT INTERNAL (INCLUDES THRU THREAD) | | THREAD LENGTH | 1.329 INCHES MINIMUM AND | | 1.359 INCHES MAXIMUM LEFT INTERNAL (INCLUDES THRU THREAD) | | SPECIAL FEATURES | FLANGE HOLES ARE 0.140 TO 0.152 INCHES DIA. CENTER TO CENTER HOLE DISTANCE IS 0.92 ALONG THE LENGTH AND 0.48 ALONG THE WIDTH. THE FLANGE IS 1.188 INCHES LONG | | PART NAME ASSIGNED BY CONTROLLING AGENCY | NUT PLATE - JACK SCREW, ARA CONNECTOR |
|
|