| CENTER SECTION THICKNESS | 2.520 INCHES MINIMUM AND 2.600 INCHES MAXIMUM |
| CENTER SECTION WIDTH | 1.000 INCHES NOMINAL |
| CENTER SECTION HEIGHT | 8.730 INCHES NOMINAL |
| FIRST LEG ANGLE | 0.210 DEGREES MINIMUM AND 0.290 DEGREES MAXIMUM |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.750 INCHES NOMINAL |
| FIRST LEG CHAMFER ANGLE | 45.0 DEGREES NOMINAL |
| FIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG LENGTH | 3.000 INCHES NOMINAL |
| FIRST LEG HOLE DIAMETER | 0.622 INCHES MINIMUM AND 0.638 INCHES MAXIMUM |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 1.300 INCHES NOMINAL |
| FIRST LEG END WIDTH | 0.500 INCHES NOMINAL |
| FIRST LEG HOLE ARRANGEMENT STYLE | TWO HOLES |
| FIRST LEG THICKNESS | 2.520 INCHES MINIMUM AND 2.600 INCHES MAXIMUM |
| FIRST LEG WIDTH | 1.000 INCHES NOMINAL |
| FIRST LEG LENGTH | 6.940 INCHES MINIMUM AND 7.020 INCHES MAXIMUM |
| FIRST LEG STYLE | CHAMFERED ENDS |
| MATERIAL DOCUMENT AND CLASSIFICATION | ASTM B209 ASSN STD SINGLE MATERIAL RESPONSE |
| MATERIAL | ALUMINUM ALLOY 6061 |
| PART NAME ASSIGNED BY CONTROLLING AGENCY | BRACKET Z, 16.5 |
| PROPRIETARY CHARACTERISTICS | PACS |
| MOUNTING HOLE TYPE | PLAIN |
| SECOND LEG ANGLE | 0.210 DEGREES MINIMUM AND 0.290 DEGREES MAXIMUM |
| SECOND LEG RELATIONSHIP TO FIRST LEG | IDENTICAL |
| SECOND LEG THICKNESS | 2.520 INCHES MINIMUM AND 2.600 INCHES MAXIMUM |
| SECOND LEG LENGTH | 6.940 INCHES MINIMUM AND 7.020 INCHES MAXIMUM |
| STYLE DESIGNATOR | DOUBLE ANGLE |