| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.281 INCHES MINIMUM AND 0.343 INCHES MAXIMUM |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.344 INCHES MINIMUM AND 0.406 INCHES MAXIMUM |
| FIRST LEG HOLE ARRANGEMENT STYLE | ONE HOLE |
| FIRST LEG ANGLE | 90.0 DEGREES NOMINAL |
| FIRST LEG STYLE | SQUARE |
| FIRST LEG THICKNESS | 0.058 INCHES MINIMUM AND 0.120 INCHES MAXIMUM |
| FIRST LEG WIDTH | 0.719 INCHES MINIMUM AND 0.781 INCHES MAXIMUM |
| FIRST LEG HOLE DIAMETER | 0.342 INCHES MINIMUM AND 0.352 INCHES MAXIMUM |
| FIRST LEG LENGTH | 1.031 INCHES MINIMUM AND 1.093 INCHES MAXIMUM |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-633, C1020 FED SPEC SINGLE MATERIAL RESPONSE |
| MATERIAL | STEEL COMP 1020 |
| MOUNTING HOLE TYPE | PLAIN |
| PART NAME ASSIGNED BY CONTROLLING AGENCY | BRACKET, CLAMP |
| SECOND LEG RELATIONSHIP TO FIRST LEG | IDENTICAL |
| SECOND LEG THICKNESS | 0.058 INCHES MINIMUM AND 0.120 INCHES MAXIMUM |
| SECOND LEG LENGTH | 0.719 INCHES MINIMUM AND 0.781 INCHES MAXIMUM |
| SPECIAL FEATURES | INSIDE ANGLE IS 0.062 RADIANS |
| STYLE DESIGNATOR | ANGLE |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-Z-325, CLASS 2, TYPE II FED SPEC SINGLE TREATMENT RESPONSE |
| SURFACE TREATMENT | ZINC |