| CENTER SECTION HEIGHT | 195.8 MILLIMETERS NOMINAL |
| CENTER SECTION THICKNESS | 8.0 MILLIMETERS NOMINAL |
| CENTER SECTION WIDTH | 50.0 MILLIMETERS NOMINAL |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 25.0 MILLIMETERS NOMINAL |
| FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 25.0 MILLIMETERS NOMINAL |
| FIRST LEG HOLE ARRANGEMENT STYLE | ONE HOLE |
| FIRST LEG ANGLE | 45.0 DEGREES NOMINAL |
| FIRST LEG LENGTH | 60.0 MILLIMETERS NOMINAL |
| FIRST LEG STYLE | SQUARE |
| FIRST LEG THICKNESS | 8.0 MILLIMETERS NOMINAL |
| FIRST LEG HOLE DIAMETER | 14.0 MILLIMETERS MINIMUM AND 14.5 MILLIMETERS MAXIMUM |
| FIRST LEG WIDTH | 50.0 MILLIMETERS NOMINAL |
| MATERIAL DOCUMENT AND CLASSIFICATION | MIL-A-46100D (MR) 8 THICK MIL SPEC SINGLE MATERIAL RESPONSE |
| MATERIAL | STEEL |
| PART NAME ASSIGNED BY CONTROLLING AGENCY | SUPPORT, LH ENGINE ARMOR MTG |
| MOUNTING HOLE TYPE | PLAIN |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 23.8 MILLIMETERS NOMINAL |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 25.0 MILLIMETERS NOMINAL |
| SECOND LEG HOLE ARRANGEMENT STYLE | ONE SLOT |
| SECOND LEG ANGLE | 45.0 DEGREES NOMINAL |
| SECOND LEG LENGTH | 57.1 MILLIMETERS NOMINAL |
| SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| SECOND LEG SLOT LENGTH | 14.0 MILLIMETERS MINIMUM AND 14.5 MILLIMETERS MAXIMUM |
| SECOND LEG SLOT WIDTH | 18.0 MILLIMETERS MINIMUM AND 18.5 MILLIMETERS MAXIMUM |
| SECOND LEG STYLE | SQUARE |
| SECOND LEG THICKNESS | 8.0 MILLIMETERS NOMINAL |
| SECOND LEG WIDTH | 50.0 MILLIMETERS NOMINAL |
| SPECIAL FEATURES | CONSISTS OF THERMOSTAT HOUSING AND AN O-RING |
| STYLE DESIGNATOR | ADJACENT ANGLES |