| SECOND LEG HOLE DIAMETER | 0.768 INCHES MINIMUM AND 0.798 INCHES MAXIMUM |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 1.000 INCHES NOMINAL |
| SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 1.000 INCHES NOMINAL |
| SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL |
| SECOND LEG STYLE | CORNER RADIUS |
| SECOND LEG THICKNESS | 0.190 NOMINAL INCHES |
| SECOND LEG LENGTH | 3.390 INCHES NOMINAL |
| SECOND LEG WIDTH | 7.000 INCHES NOMINAL |
| SPECIAL FEATURES | SLOT LOCATED ON CENTER SECTION BETWEEN LEGS; SLOT NOMINAL LENGTH IS 2.500 INCHES; SLOT NOMINAL WIDTH IS 0.380 INCHES; CENTER POINT OF SLOT IS LOCATED 2.000 INCHES FROM LENGTHWISE AND WIDTHWISE EDGES TO ONE SIDE |
| STYLE DESIGNATOR | ADJACENT ANGLES |
| CENTER SECTION WIDTH | 7.000 INCHES NOMINAL |
| CENTER SECTION HEIGHT | 4.250 INCHES NOMINAL |
| CENTER SECTION THICKNESS | 0.190 INCHES NOMINAL |
| FIRST LEG ANGLE | 90.0 DEGREES NOMINAL |
| FIRST LEG CORNER RADIUS | 0.500 INCHES NOMINAL |
| FIRST LEG LENGTH | 2.000 INCHES NOMINAL |
| FIRST LEG HOLE ARRANGEMENT STYLE | NO HOLE |
| FIRST LEG WIDTH | 7.000 INCHES NOMINAL |
| FIRST LEG STYLE | CORNER RADIUS |
| FIRST LEG THICKNESS | 0.190 NOMINAL INCHES |
| MATERIAL DOCUMENT AND CLASSIFICATION | ASTM B209. H32 ASSN STD 1ST MATERIAL RESPONSE OR ASTM B928. H116 ASSN STD 1ST MATERIAL RESPONSE OR ASTM B209. H32 ASSN STD 2ND MATERIAL RESPONSE OR ASTM B928. H116 ASSN STD 2ND MATERIAL RESPONSE OR ASTM B209. H32 OR H34 ASSN STD 3RD MATERIAL RESPONSE |
| MATERIAL | ALUMINUM ALLOY 5083 OR ALUMINUM ALLOY 5086 OR ALUMINUM ALLOY 5052 |
| PART NAME ASSIGNED BY CONTROLLING AGENCY | BRACKET, SUPPORT, GUN |
| PROPRIETARY CHARACTERISTICS | PACS |
| MOUNTING HOLE TYPE | PLAIN |
| SECOND LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH | 5.000 INCHES NOMINAL |
| SECOND LEG ANGLE | 90.0 DEGREES NOMINAL |
| SECOND LEG CORNER RADIUS | 0.500 INCHES NOMINAL |
| SECOND LEG HOLE ARRANGEMENT STYLE | TWO HOLES |