|
|
|
National Stock Number:
5340-01-575-6520
Federal Supply Class:
5340
National Item Identification Number:
015756520
Description:
BRACKET,ANGLE
Detail:
A ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
|
Manufacturer Information:
| 4287583 | 076M6 | AMZ ALABAMA INC. | | 4287583 | 80212 | BAE SYSTEMS LAND & ARMAMENTS L.P. |
|
Techincal Specification:
| FIRST LEG ANGLE | 90.0 DEGREES NOMINAL | | FIRST LEG HOLE ARRANGEMENT STYLE | NO HOLE | | FIRST LEG THICKNESS | 0.500 NOMINAL INCHES | | FIRST LEG WIDTH | 1.180 INCHES NOMINAL | | FIRST LEG LENGTH | 4.770 INCHES NOMINAL | | FIRST LEG STYLE | SQUARE | | MATERIAL DOCUMENT AND CLASSIFICATION | ASTM A36 ASSN STD SINGLE MATERIAL RESPONSE OR ASTM A108. 1018 THROUGH 1026 ASSN STD SINGLE MATERIAL RESPONSE OR ASTM A576. 1018 THROUGH 1026 ASSN STD SINGLE MATERIAL RESPONSE | | MATERIAL | STEEL | | PART NAME ASSIGNED BY CONTROLLING AGENCY | BRACKET, HANDLE, CREW DOOR | | PROPRIETARY CHARACTERISTICS | PACS | | MOUNTING HOLE TYPE | THREADED | | SECOND LEG HOLE ARRANGEMENT STYLE | ONE HOLE | | SECOND LEG HOLE DIAMETER | 0.250 NOMINAL INCHES | | SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH | 0.590 INCHES NOMINAL | | SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH | 0.591 INCHES NOMINAL | | SECOND LEG END RADIUS | 0.590 INCHES NOMINAL | | SECOND LEG RELATIONSHIP TO FIRST LEG | NOT IDENTICAL | | SECOND LEG STYLE | END RADIUS | | SECOND LEG THICKNESS | 0.500 NOMINAL INCHES | | SECOND LEG LENGTH | 4.910 INCHES NOMINAL | | SECOND LEG WIDTH | 1.180 NOMINAL INCHES | | SPECIAL FEATURES | SECOND END IS MILLED TO A NOMINAL THICKNESS OF 0.280 INCHES BY 1.340 INCHES FROM END; A COUNTER BORED HOLE 0.873 INCHES BY 0.310 INCHES DEEP WITH A 0.377 INCH SQUARE BORE IS ALSO LOCATED ON THE SECOND END 1.910 INCHES FROM END ALONG SAME HOLE CENTER LINE AS THREADED HOLE; TWO THREADED HOLES 0.250 INCHES NOMINAL DIAMETER ARE DRILLED INTO END OF FIRST END; ALL THREADED HOLES ARE UNIFIED COARSE THREAD, 20 THREADS PER INCH, CLASS 2B THREAD FIT | | STYLE DESIGNATOR | ANGLE |
|
|